733447
8
Zoom out
Zoom in
Previous page
1/78
Next page
3
FBK 4 A1
GB
IE
Strimmer/cutting blade attachment FBK 4 A1
4 x bolts (with snap ring, washer and nut)
Blade guard
3-section cutting blade
5@
Strimmer with cutting filament
5#
Front boom (strimmer/3-section cutting blade)
5$
Locking hole
5%
Drive shaft
Extension attachment
5^
Boom
5&
Screw grip
5*
Safety lever
5(
Cover
6)
Locking hole
6!
Drive shaft
Accessories
6@
Carrying harness
6#
Blade guard
6$
Chain guard
6%
Organic chain oil
6^
Oil/petrol mixing canister
6&
Safety goggles
6*
M4 Allen key
6(
M5 Allen key
7)
SW 8/10 open-ended spanner
7!
Spark plug wrench/flat-blade screwdriver
7@
Tool bag
7#
M10 nut (left-hand thread)
7$
Pressure plate cover
7%
Pressure plate
7^
Drive plate
Package contents
1 Motor unit
1 Hedge trimmer attachment FBK 4 A1-1 (hereinafter hedge trimmer)
1 Pole pruner attachment FBK 4 A1-2 (hereinafter pole pruner)
1 Strimmer/cutting blade attachment FBK 4 A1
1 Extension attachment
1 Handle with barrier bar
1 Strimmer with cutting filament
1 3-section cutting blade
1 Carrying harness
1 Protective cover for chain
1 Protective cover for blade
1 Oil/petrol mixing canister
1 100 ml organic chain oil
1 Tool bag
1 M4 Allen key
1 M5 Allen key
1 Spark plug wrench/flat-blade screwdriver
1 SW 8/10 open-ended spanner
1 Safety goggles
1 Operating manual
Technical data
Motor unit
Engine type: 2-stroke engine, air-cooled,
chrome cylinder
Engine output (max.): 1.35 kW/1.85 hp
Cylinder capacity: 42.7 cm³
Engine idle speed: 3000 min
-1
Max. engine speed
with 3-section cutting blade: 9200 min
-1
with strimmer: 8700 min
-1
with chainsaw: 9200 min
-1
with hedge trimmer: 9200 min
-1
Max. cutting speed
with 3-section cutting blade: 6900 min
-1
with strimmer: 6525 min
-1
with chainsaw: 20 m/s
with hedge trimmer: 1550 min
-1
Ignition: Electronic
Drive Centrifugal clutch
Weight:
(empty tank): approx. 5.6 kg
Tank size: 1200 cm
3
Spark plug: TORCH L7RTC
Fuel consumption at
max. engine performance: 0.6 kg/h
Specific
fuel consumption
at max. engine performance: 446 g/kWh
Hedge trimmer FBK 4 A1-1
Cut length: 425 mm
Cutting capacity: 20 mm
Weight
(ready for use): approx. 2.24 kg
Pole pruner: FBK 4 A1-2
Weight (ready for use): approx. 1.6 kg
Recommended fill level (oil tank): 140 cm
3
Cut length: approx. 260 mm
Blade: Oregon Type 100SDEA318
Saw chain Oregon 91P040X
Oregon 91P040E
Strimmer/
cutting blade attachment: FBK 4 A1
Strimmer with cutting filament (IAN 110011)
Filament cutting circle Ø: 43 cm
Filament length: 8.0 m
Filament Ø: 2.0 mm
3-section cutting blade (IAN 110011):
Cutting blade cutting diameter Ø: 24 cm
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FBK 4 A1 - IAN 110011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBK 4 A1 - IAN 110011 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info