722851

Florabest FAAS 12 B2 - IAN 298707 Manual

23
Zoom out
Zoom in
Previous page
1/87
Next page
GB│IE │ 19 ■
FAAS 12 B2
Attaching/removing the grip bracket
NOTE
► The grip bracket cannot be attached/
removed while the saw blade is attached.
Attaching the grip bracket (see fig. B–D):
♦ Press the release button .
♦ Push the grip bracket over the guides on the
base plate and onto the appliance.
♦ Lock the release button .
Removing the grip bracket:
♦ Press the release and pull the grip bracket
forwards out of the guides.
Fitting/changing the saw blade
Wear protective gloves when fitting/changing a
saw blade.
♦ Turn the quick-release chuck as far as it will
go in the direction of the arrow and hold it in
this position.
♦ Push the required saw blade into the quick-
release chuck as far as the stop.
CAUTION!
► The teeth of the saw blade must point
downwards!
♦ Let go of the quick-release chuck ; it must
return to its initial position.
The saw blade is now locked.
Operation
Switching on and off
Switching on:
♦ Press the safety lock-out .
♦ Press the ON/OFF switch .
Switching off:
♦ Release the ON/OFF switch .
Sawing methods
A) Working without the grip bracket (see fig. E):
■ For branches of a larger diameter or wood,
plastic or building material, work without the
grip bracket. The workpiece must be right up
against the base plate. Use a rocking cutting
motion for round workpieces.
A1) Sawing flush:
■ Flexible saw blades allow you to saw off pro-
truding workpieces such as pipes located close
to the wall, provided the saw blade is long
enough.
1. Place the saw blade directly against the wall.
2. Bend it by applying lateral pressure to the recip-
rocating saw so that the base plate comes
into contact with the wall.
3. Switch the appliance on as described and saw
off the workpiece by applying constant pressure.
A2) Plunge cutting (see fig. F):
CAUTION! RISK OF KICKBACK!
► Plunge cuts may only be made in soft materials
(wood or similar).
1. Place the reciprocating saw with the lower edge
of the base plate on the workpiece. Switch
the appliance on.
2. Tilt the reciprocating saw forwards and plunge
the saw blade into the workpiece.
3. Position the reciprocating saw vertically and
continue sawing along the cutting line.
B) Working with the grip bracket (see fig. G):
♦ Push down lightly and move the saw downwards.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FAAS 12 B2 - IAN 298707 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FAAS 12 B2 - IAN 298707 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info