Manual Florabest FAAS 10.8 A2 - IAN 109793 (page 10 of 35) (English, German, Dutch)

722886

Zoom out

Zoom in

1/35

10 GB/IE

Before using / Start-up… / Safety notices for chargers / Working instructions for sawing / Before using

After switching off do not stop the saw

blade by pressing it sideways against

an object. The saw blade could be damaged,

brake, or cause kickback.

Secure the material well. Do not sup-

port the work piece with your hand or

foot. Do not touch objects or the ground

with the saw running. Risk of kickback.

Secure the work piece. Use clamps or a

vice to ﬁrmly hold the work piece. This results

in a safer grip than with your hand.

Wait for the power tool to stop before

putting it down. The tool being used could

catch, resulting in losing control over the

power tool.

Lock the on/off switch to the off posi-

tion before working on the power tool

(e.g. maintenance, tool change, etc.),

and when transporting or storing. Risk

of injury if the on/oﬀ switch is accidentally acti-

vated.

Protect the power tool from heat, e.g.

also from continuous sunlight, fire,

water and moisture. Risk of explosion.

Wear the dust mask when using the tool.

Safety notices for chargers

This device may be used by children age 8 years

and up, as well as by persons with reduced phys-

ical, sensory or mental capacities, or lacking

experience and/or knowledge, so long as they

are supervised or instructed in the safe use of

the device and understand the associated risks.

Children should not be allowed to play with the

device. Cleaning and user maintenance should

not be performed by children without supervision.

The charger is only suitable for

indoor use.

Do not operate the device if

the cable, mains cable, or plug are damaged. A

damaged mains cable indicates a life-threaten-

ing danger due to electric shock.

Working instructions for sawing

Check the material you wish to cut for foreign

objects such as nails, screws, etc. and remove

these.

Immediately switch oﬀ the tool if the saw blade

is jammed. Spread the previously cut slit with a

suitable tool and remove the sabre saw.

Saw the material with an even feed motion.

Original accessories / tools

Use only the accessories specified in

the operating instructions. Using tools or

accessories other than those recommended in

the operating instructions could result in injury.

Information about saw blades

You can use any saw blade, provided it has the

correct shank ﬁtting - ½

(12.7 mm) universal shank.

Saw blades in various lengths optimised for any sa-

bre saw application are available from your retailer.

Note: TPI = teeth per inch = number of teeth per

2.54 cm

Before using

Removing / charging / inserting

the battery pack

Note: The battery is partly charged at the time of

delivery. Charge the battery before use. Li-Ion bat-

teries can be charged at any time without reducing

the life. Interrupting the charging process does not

damage the rechargeable battery.

1. To remove the battery pack

press the release

buttons

and slide the battery pack

out

of the tool.

2. Insert the rechargeable battery pack

into

the rapid charger

3. Insert the mains plug into the mains socket. The

status LED

will light up red.

How can I purchase a new battery for my IAN 109793 ? Thank you
mik.ferran@bluewin.ch Submitted on 22-8-2021 at 17:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FAAS 10.8 A2 - IAN 109793 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FAAS 10.8 A2 - IAN 109793 Manual

Product: