722882

Florabest FAAS 10.8 A1 - IAN 57384 Manual

41
Zoom out
Zoom in
Previous page
1/44
Next page
41 GB
®
Before using / Start-up / Maintenance and Cleaning… / Safety notices for chargers / Working instructions for sawing / Before using
Installing / replacing the
saw blade
Always wear safety gloves when installing /chang-
ing the saw blade.
Turn the quick-release chuck
8
all the way in
the direction of the arrow and keep it turned.
Push the selected saw blade all the way into the
quick-action blade clamp
8
.
Release the quick-action blade clamp
8
, which
must then return to its original position.The saw
blade is now locked.
Start-up
Switching on and off
Switching on:
Press the switch lock
1
.
Press the ON- / OFF switch
5
.
Switching off:
Release the ON- / OFF switch
5
.
Attaching / Removing the
holding bracket
Note: The retaining bracket
11
cannot be installed /
removed with the saw blade installed.
Attaching the holding bracket
(see Fig. B–D):
Press the release button
10
.
Slide the holding bracket over the guides of the
shoe
7
into the tool.
Lock the release button
10
.
Removing the holding bracket:
Press the release
10
and pull the holding
bracket
11
forward and out of the guide.
Sawing techniques
A) Working without holding bracket
(see Fig. E):
When cutting thicker branches or sawing wood,
plastic or materials, work WITHOUT holding
bracket. The piece to be sawed must touch the
shoe. Use a rocking motion when cutting round
pieces.
A1) Flush cuts:
When using flexible saw blades with the respective
length you can cut protruding pieces, e.g. pipes,
flush with the wall.
1. Place the saw blade directly against the wall.
2. Apply sideways pressure to the sabre saw,
bending it so the foot plate
7
touches the
wall sideways.
3. Switch on the tool and saw through the work
piece, applying consistent pressure.
A2) Plunge sawing (see Fig. F):
CAUTION! RISK OF KICK-BACK! Only
plunge saw soft work pieces (wood, etc.).
1. Place the bottom edge of the sabre saw shoe
7
onto the work piece.
Switch on the tool.
2. Tip the sabre saw forward and plunge the saw
blade into the work piece.
3. Straighten the sabre saw into a vertical posi-
tion and continue cutting along the cutting line.
B) Using the holding bracket (see Fig. G):
Move the saw, applying slight downward pressure.
Maintenance and Cleaning
Always disconnect the mains plug from the
socket and remove the battery pack
3
before
cleaning.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FAAS 10.8 A1 - IAN 57384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FAAS 10.8 A1 - IAN 57384 in the language / languages: German, Italian as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FAAS 10.8 A1 - IAN 57384

Florabest FAAS 10.8 A1 - IAN 57384 User Manual - English, Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info