677853
83
Zoom out
Zoom in
Previous page
1/276
Next page
Working with measurement tools17
You can also set an audible alarm (there will be a “beep” when the alarm is triggered).
17.8.4 Procedure
There are different procedures for setting up an alarm for a spot, box, circle, or line and for
a difference calculation.
17.8.4.1 Setting up an alarm for a spot
Follow this procedure:
1. To select the spot, touch the tool on the screen. The tool is now displayed with a frame.
2. Push the joystick—or touch and hold the tool. This displays a context menu.
3. Use the joystick to go to
(Set alarm on spot).
4. Push the joystick. This displays a dialog box where you can define the settings for the
alarm.
Alarm condition: The condition that triggers the alarm. Applicable values are Above,
Below, or Off.
Alarm limit: The temperature value that will be the critical condition when an alarm is
triggered or not.
Alarm sound: Applicable values are Beep or No sound.
5. Push the joystick. This closes the dialog box.
17.8.4.2 Setting up an alarm for a box, circle, or line
Note This procedure assumes that you have previously set the camera to display at least
one value (maximum, minimum, or average) in the result table.
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the joystick—or touch and hold the tool. This displays a context menu.
3. Use the joystick to go to (depending on tool)
, , or (Max/Min/Avg/Alarm) or
(Graph/Max/Min/Avg/Alarm).
4. Push the joystick. This displays a submenu.
5. Select
(Set alarm).
6. Push the joystick. This displays a dialog box where you can define the settings for the
alarm.
Alarm condition: The condition that triggers the alarm. Applicable values are Above,
Below, or Off.
Select measurement: Applicable settings are the values you have previously de-
fined (Max, Min, and/or Avg).
Alarm limit: The temperature value that will be the critical condition when an alarm is
triggered or not.
Alarm sound: Applicable values are Beep or No sound.
7. Push the joystick. This closes the dialog box.
17.8.4.3 Setting up an alarm for a difference calculation
Note
You can set up an alarm for a difference calculation when defining user presets, or
when editing an image in the archive.
This procedure assumes that you have previously set up a difference calculation.
#T559954; r. AL/37426/37426; en-US
69
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flir T1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flir T1020 in the language / languages: English as an attachment in your email.

The manual is 29,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info