Manual FlinQ UV-Sterilizer (page 3 of 14) (English, Dutch)

791825

Zoom out

Zoom in

1/14

NOTE. You can expand the bag by holding the top and below part by each of your 2 hands and pull

it outwards so it will double it’s capacity when needed of for higher products to sanitize.

2.Close the bag with the zipper again and connect the zipper to the internal Hall-switch as indicated

in the illustration.

3.Press the power ON/OFF button 1x to start sterilization process.

4. The BLUE LED indicator is flickering and sterilization lasts for 30 seconds, when the led is OFF

then flip your item(s) over and repeat the process again. When this is done, take out the item(s),

close the bag with the zipper and clean your hands with water and soap or any other disinfectant

cleaner when ready. The process is completed.

NOTE: If the zipper is not placed to the internal hall switch magnet of the bag itself the sterilizer

will not work for your safety! Please place it properly till you feel it will fix firmly to the internal

magnet so the power ON/OFF button can be work as described.

Working Principle from the sterilizer:

UV-C and UV-A is a short wavelength light invisible to the human eye and kills these germs by

disrupting their DNA so they can't function or reproduce again/anymore. The UV-C sanitizer

maximizes sanitization effectiveness between light dispersion angle and UV-C intensity to ensure

optimal ultraviolet light exposure across both sides of your device.

Indicator Status light:

①

②

③

④

Product Status:

⚫ Sterilizer process working

⚫ •Low battery

⚫ •Hall-switch not properly connected

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FlinQ UV-Sterilizer in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FlinQ UV-Sterilizer Manual

Product: