Manual FlinQ FQC8226 (page 12 of 17) (English, German, Dutch, French, Italian, Spanish)

791809

Zoom out

Zoom in

1/17

NL 2.3 Spreid de lichtketting volledig uit op de grond.

2.4 Neem de bovenste paal en koppel deze aan de ring. Zorg ervoor dat de paal in het midden van de 9 lichtkettingen wordt geplaatst.

De bovenste paal moet dan het draaiende, bewegende element zijn om de paal en ring aan elkaar te bevestigen. ALS DE RING HET

DRAAIENDE ELEMENT IS, KUNNEN DE LICHTKETTINGEN EN DE TOUWEN IN DE WAR RAKEN.

2.5 Verbind de middelste paal met het reeds gemonteerde deel. Ook nu van belang om alleen de te koppelen paal te laten draaien.

2.6 Herhaal stap 2.5 met de onderste paal

2.7 Herhaal stap 2.5 met de tweede middelste paal en de onderste paal.

DE 2.3 Lichterkette vollständig auf dem Boden ausbreiten.

2.4 Oberes Mastsegment mit dem Ring verbinden. Sicherstellen, dass der Mast in die Mitte der 8 Lichterketten eingesetzt wird. Das obere

Mastsegment sollte das bewegliche Element sein, nachdem es mit dem Ring verbunden wurde. WENN DER RING DAS BEWEGLICHE

ELEMENT IST, VERWICKELT SICH DIE LICHTERKETTE MIT DEM SEIL.

2.5 Erstes mittleres Mastsegment mit dem bereits montierten Teil verbinden. Auch hier ist es wichtig, nur das Mastsegment zu drehen/

bewegen, das angebracht/angeschlossen werden soll

2.6 Schritt 2.5 für das untere Mastsegment wiederholen

2.7 Schritt 2.5 für das zweite mittlere Mastsegment und das untere Mastsegment wiederholen

FR 2.3 Étendez complètement la chaîne lumineuse sur le sol.

2.4 Prenez le piquet supérieur et connectez-le à l’anneau. Assurez-vous que le piquet est inséré au milieu des 8 chaînes lumineuses. Le

piquet supérieur doit être l’élément mobile lorsque vous attachez le piquet supérieur et l’anneau ensemble. SI L’ANNEAU EST L’ÉLÉMENT

TOURNANT, LES CHAÎNES LUMINEUSES ET LA CORDE S’EMMÊLERONT.

2.5 Connectez le piquet central à la partie déjà assemblée. Ici aussi, il est important de ne tourner/déplacer que le piquet que vous allez

ﬁxer/connecter.

2.6 Répétez l’étape 2.5 avec le piquet du bas.

2.7 Répétez l’étape 2.5 avec le deuxième piquet central et le piquet inférieur.

IT 2.3 Stendere completamente la catena al suolo.

2.4 Prendere il palo superiore e connetterlo all’anello. Accertarsi che il palo sia inserito al centro delle 8 catene luminose. Il palo

superiore dovrebbe essere l’elemento mobile quando si ﬁssano insieme il palo superiore e l’anello. SE L’ELEMENTO GIREVOLE E’

L’ANELLO, LE CATENE LUMINOSE E LA FUNE SI AGGROVIGLIERANNO

2.5 Connettere il palo di mezzo alla parte già assemblata Anche in questo caso, è importante ruotare/muovere solo il palo che di ﬁssa/

connette.

2.6 Ripetere la fase 2.5 con il palo inferiore

2.7 Rip0etere la fase 2.5 con il secondo palo centrale e con il palo inferiore

ES 2.3 Extienda la cadena de luces completamente en el suelo.

2.4 Tome el poste superior y conéctelo al anillo. Asegúrese de que el poste está insertado en el centro de las 8 cadenas de luces. El poste

superior debe ser el elemento móvil cuando una el poste superior y el anillo. SI EL ANILLO ES EL ELEMENTO DE GIRO, LAS CADENAS DE

LUCES Y LA CUERDA SE ENREDARÁN ENTRE SÍ.

2.5 Conecte el poste central a la pieza ya montada. Aquí también es importante girar/mover el poste que va a conectar/unir.

2.6 Repita el paso 2.5 con el poste inferior.

2.7 Repita el paso 2.5 con el segundo poste central y el poste inferior

3 meter

4 meter

3 meter

4 meter

3 meter

4 meter

3 meter

4 meter

3 meter

4 meter

1 2 3

3 meter

4 meter

3 meter

4 meter

3 meter

4 meter

3 meter

4 meter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FlinQ FQC8226 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FlinQ FQC8226 Manual

Product: