at max 3.1A total.
NOTE! DISCONNECT FROM POWER SUPPLY AFTER USE!
How to use?
1. Connect the USB Wall Charger to your power outlet.
2. Use your original factory appliance USB cable only and connect it with one of the two USB ports that
can be used for Apple and Android.
3. Disconnect all cables and mains after use.
Function Description
USB1 / USB2
Safety
1. This product must be used as required, otherwise it can cause a fire, explosion or other dangers.
2. Do not use any product other than specified with this charger. As this can cause damage to your
charger.
3. Ensure that the charger and devices are not overheating. If overheating occurs remove power
supply from charger and allow to cool down. Once cooled down reconnect cable.
4. Do not operate the product outside the power limits given in the specifications.
5. Keep away from children! This is not a toy!
6. Only connect the product to a socket that has been approved for the device. The socket must be
installed close to the product and easily accessible.
7. Do not continue to operate the device if it becomes visibly damaged.
8. Do not bend or crush the cable.
9. Always pull directly on the plug when disconnecting the USB cable, never on the cable itself
10. Keep this product, as all electrical immediately according to locally applicable regulations.
11. Do not modify the product in anyway. Doing so voids the warranty.
12. It’s normal for(smart) phone and tablet etc. charger to get warm.
13. Protect the product from dirt, moisture and overheating, and only use it in an dry environment.
14. Do not drop the product and do not expose it to any major shocks.