505081
18
Zoom out
Zoom in
Previous page
1/204
Next page
Renovation milling machine FS 3403 VRG
18
Changing individual milling
wheels
Always use the same type of milling wheels.
1. Place the renovation milling machine on
its back.
2. Loosen countersunk screws (18) on the
hub cover and remove hub cover (17).
3. Take axle out of the tool holder.
4. Replace damaged or worn milling
wheel. Re-assemble in the correct
sequence!
5. Insert the cylindrical end of the axle into
the tool holder, insert the square end
into the hub.
6. Attach hub cover and secure with the
4 screws.
Changing the milling head
Note!
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
1. Place the renovation milling machine
on its back.
2. Press spindle lock (2) and loosen the
milling head with Allen key.
3. Screw on new milling head and, after
actuating the spindle lock, tighten with
Allen key.
4. Insert the mains plug into the socket.
5. Switch on renovation milling machine
(without locking the switch) and leave
running for approx. 30 seconds.
Check for imbalances and vibrations.
Book_Gr2.book Seite 18 Donnerstag, 31. August 2006 1:24 13
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flex FS 3403VRG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flex FS 3403VRG in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info