772475
16
Zoom out
Zoom in
Previous page
1/40
Next page
14
2. Choose [Print from SD], tap [OK]. Tap down arrow to the next page, choose [PlateLeveling.x3g],
tap [OK] to leveling process.
Attention: Leveling would affect print effect directly, if print result is unsatisfactory,
please do leveling again.
3. After leveling starts, there would be a prompt on the LCD panel. Tap [Ok], turn the page.
After prompt is over, extruder starts to move and stops above leveling knobs at the front
build plate.
4. Take leveling card out, on the basis of right side extruder, put leveling card between right
extruder and build plate. Slide leveling card back and forth and adjust leveling knobs in the
meantime.
If you can move leveling card easily, please rotate leveling knobs clockwise to reduce the
distance between build plate and nozzle. Otherwise, rotate leveling knobs anticlockwise to
increase the distance between build plate and nozzle.
If you feel slight friction sensitivity when moving leveling card, the distance between
extruder and leveling card is proper, thus adjustment compeleted.
5. After the first leveling point completed, tap [OK]. The extruder will move to the second leveling
point. Adopt same method to adjust. After three leveling points completed all, leveling
completed. Tap [Ok] to end leveling process, press leftwards arrow to go back to home screen.
Find the 3 knobs on
the botton of the
platform and tighten
four or five turns.
Nozzles are at the
right height when
you can just slide a
sheet of paper
between the nozzle
and the platform
Grab a sheet of
paper to assist us.
Please wait.
In each position,
we will need to
adjust 2 knobs at
the same time.
Start the adjustment process
with the right nozzle, then use
the distance between the right
nozzle and build plate as a
reference.
FlashPrint
Video
Test File
User Guide
PlateLeveling.x3g
Happy3D Software
Quick Start Guide
Exit Menu
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flashforge Creator Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flashforge Creator Pro in the language / languages: English as an attachment in your email.

The manual is 36.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info