589924

Fissler Vitavit edition Digital Manual

53
Zoom out
Zoom in
Previous page
1/386
Next page
Sicherheitshinweise
51
D
GB
F
NLIEPGRTRRUSSPLCZARA
12. Maintenance and replacement parts
Please note
Replace parts which are subject to wear, such as the rubber gasket and other rubber parts, regularly with original
Fissler spare parts after c. 400 cooking operations or at the latest after two years. Parts which are clearly damaged
(e.g. hardening, cracks, discolorations, overheating, or deformation) or do not fit properly must be replaced immedia-
tely. Failure to do so will result in the efficiency and safety of your pressure cooker being reduced.
Information on replacing parts
Silicone gasket (Fig. A-20)
See Chapter 5.
Silicone membrane (Fig. A-22)
See Fig. V
Detach the control valve from the lid and remove the old silicone membrane. Place the new silicone membrane on
the plastic rod of the traffic light indicator and press the edge onto the metal push rod as far as the beginning of the
thread.
Molded valve seal (Fig. A-23)
See Fig. W
Detach the control valve from the lid and remove the old seal. Select Setting 2 on the control valve, because this will
make it easier to mount the seal. First place the new seal over the metal push rod, then press the other side all the
way up over the tappet. Ensure that the control valve seal is tight all the way round, and that the seal is contained in
the indentation provided for it.
Valve base seal (Fig. A-24)
See Fig. X
Detach the control valve from the lid and remove the old seal. Put the new seal in place and make sure that the seal
is perfectly flat on both sides of the lid.
O-ring for Euromatic (Fig. A-18)
See Fig. I
The o-ring is removed/mounted on the inside of the lid. Make sure that the ring lies totally in the groove provided
for it.
Euromatic (Fig. A-18)
To remove/mount the Euromatic, you must first remove the lid handle. This is very simple, as you only have to loosen
the screw on the inside of the lid. You can remove the Euromatic from the lid as soon as you have removed the
o-ring. For mounting, guide the new Euromatic without the o-ring through the lid so that the side with the white ball
is on the inside of the lid. Then you can mount the o-ring as described above.
Maintenance and replacement parts
140901_02_GAL_Vitavit_edition_GB.indd 51 04.02.15 09:39
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fissler Vitavit edition Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fissler Vitavit edition Digital in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info