Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowersFiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
Cut Height Adjustment
1. Standing to the rear of the mower, place your left hand on the lifting handle
(A) to support the mower during adjustment.
2. Use your right hand to pull the cut height adjustment knob (B) away from
the mower and move to your desired cut height. Then release the knob,
making sure it snaps back into place.
3. Repeat the process on the other side, reversing hand placement, making
sure both wheels are at the same setting. Failure to align the wheels will result
in an uneven cut.
Note: The factory-set cut height range is 1.5"–3.5".
Adjusting Your Mower
89
Adjusting Your Mower
Handle Height Adjustment
1. For people of average height, handle hole 2 can be used for the middle
cut-height settings, which are the most common. If you are tall or plan to
use the lower cut height settings, consider using hole 3. If you are short or
plan to use the higher cut height settings, consider using hole 1.
2. Before adjusting the handle height, it is important to set the mower to the
cut height that you will use most frequently (see Cut Height Adjustment).
3. Push the mower forward several feet, then turn it around as you would at
the end of a mowing run. If you can push the mower comfortably without the
front end rising and if you can turn the mower without hunching over, you
have the handle set properly.
• If the front end rises, you have the handle set too high. Lower the
handle by using hole 1.
• If you have to hunch over a great deal to turn, you have the handle set
too low. Raise the handle by using hole 3.
3. As the cut height is adjusted, the handle’s bottom position will also move.
Consequently, you may need to adjust the handle height if you drastically
change the cut height. Adjustment may also be needed if you share
mowing duties with someone else.
IMPORTANT: To maximize comfort and control, your mower
features a height-adjustable handle. The handle is designed to
“oat” between its bottom and in-use positions. The bottom position is
used to pivot through turns. The in-use position should be 6"–10" above
the bottom position. Lifting the handle in this fashion keeps the front
end from rising off the ground to ensure an even cut. Since selecting
the correct handle height is extremely important, it is worth the
trial and error that may be required to nd the ideal height.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Fiskars Stay Sharp - 6208 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Fiskars Stay Sharp - 6208 in the language / languages: English as an attachment in your email.
The manual is 15,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
