648104

Fisher and Paykel WashSmart Manual

31
Zoom out
Zoom in
Previous page
1/44
Next page
29
Before you call for service
User warnings
Your washer is capable of diagnosing a number of its own problems. It will sound a continuous
series of beeps and display a code when it has a problem that you can correct yourself. All
control panel lights will turn off and the code will be displayed to inform you what the problem
is. To stop the beeps, press any button on the control panel. Do not try to continue washing once
you stop the noise. You must address the problem the washer is alerting you to.
Check this chart before you call for service.
Description Displayed as What should you do?
Water is not
getting to the
machine
Check the taps have been turned on.
If there is no hot water connection the machine will heat the
water itself, but there must be a cold water connection to the
cold valve.
Check the hose connections. If the cold water supply is
connected to the hot valve and there is no connection to the
cold valve the machine will not fill.
Check the inlet hose filters are not blocked, the hoses are not
kinked and are attached correctly.
Check that the drain hose is not too low or pushed into the
standpipe too far. This will cause the water to siphon out of
the machine.
Check the cold water temperature does not exceed the 35°C
temperature requirement.
Check the water flow rate. It maybe too low.
Wash load is
out of balance
Touch START / PAUSE to try the spin again.
If the out of balance persists, pause the cycle, manually
redistribute the load and touch START / PAUSE to spin again. If
necessary, stop the cycle, select SPIN and touch START / PAUSE.
If the problem persists, check the machine is correctly levelled.
Too many
suds
Machine will stop and flash “Sud LOC” for 10 minutes while
waiting for suds to dissipate. The machine will not beep during
this time. After 10 minutes the machine will automatically
restart. At any point during that 10 minutes you can press
START / PAUSE to restart the machine, but it is recommended
that the machine be left to restart automatically.
Check you are using a suitable detergent.
Check you are not overdosing the detergent.
Check the standpipe height for the drain does not exceed
1200 mm.
… 31 …


Need help? Post your question in this forum.

Forumrules
1

Forum

fisher-and-paykel-washsmart

Reset search

  • Message reads “too full”. It is not too full but removed some items message still the same. Anything I can do or time to buy new one. It’s about 8 years old. And over the last 15 months had a lot of use as extra 3 people in household. Submitted on 1-3-2022 at 22:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fisher and Paykel WashSmart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fisher and Paykel WashSmart in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info