648104
26
Zoom out
Zoom in
Previous page
1/44
Next page
24
Wash cycle options
Keylock
This option enables you to deactivate the buttons on the display panel, except for the POWER
and KEYLOCK buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF, when the washer is powered on:
Touch and hold the KEYLOCK button for 2 seconds.
Note: when activated, the light above the KEYLOCK button is illuminated.
If Keylock mode is activated and the machine is powered off:
To turn your washer on, press the POWER button, then touch and hold the KEYLOCK button for
twoseconds. Select your wash cycle, options and then START / PAUSE to start the cycle.
Delay Start
The DELAY START option enables you to delay the start of the wash cycle from between
5minutes and 12hours. Times you can select are 5min, 15min, 30min, 1hour, then hourly up
to 12hours. This can be useful to time your washing to finish when you arrive home from work,
or to start once you have finished in the shower. Certain stain removers also require you to spray
them on then leave for several minutes, before washing. Your washer will wait for the selected
time then start without you having to wait or remember to start your machine.
To programme a DELAY START time, simply touch the MORE
button to increase the delay
time and LESS
button to decrease the time or turn DELAY START off. Touch START / PAUSE
to confirm your selection and start the countdown. Once started, the time will countdown
on the digital display panel in 1 minute increments, the DELAY START light will flash and the
START / PAUSE light will stop flashing and turn on solid.
Note: if you hold the MORE
button down, the time displayed on the screen will increase after
every half a second (more convenient than touching the button repetitively).
To remove a delay start time once it is counting down, simply touch START / PAUSE, then
touch the LESS
button to decrease the time to zero. Touch START / PAUSE to start the cycle
immediately.
Note: we suggest that you avoid using DELAY START for damp, non-colourfast items as this may
cause dye run to occur. We also recommend you use powder detergent when you use the DELAY
START function.
26


Need help? Post your question in this forum.

Forumrules
1

Forum

fisher-and-paykel-washsmart

Reset search

  • Message reads “too full”. It is not too full but removed some items message still the same. Anything I can do or time to buy new one. It’s about 8 years old. And over the last 15 months had a lot of use as extra 3 people in household. Submitted on 1-3-2022 at 22:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fisher and Paykel WashSmart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fisher and Paykel WashSmart in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info