737291
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Assembly Instructions
STEP 2
Mounting Rower Seat and Upper Mainframe
REQUIRED
Left/Right Side Rails [2]
Rower Seat [3]
To install the rower seat, spread the Left/Right Side Rails[2]
slightly and drop the Rower Seat[3] into the track.
Note Seat indentation must face rearward.
Seat Indentation
Left/Right Side Rails
Rower Seat
STEP 3
Install the Mainframe[1] onto the Side Rail Assembly[2] as shown.
You will need 8x M8x45mm Bolts[11], 16x M8 Washers[7], 8x M8
Standard Nuts[8] and 8x M8 Nyloc Nuts[9].
Secure the front Lower Bracket first, then the Footboard but
DO NOT TIGHTEN. You may find that the Lower Bracket Bolts can
be difficult to access. You can tighten these bolts completely once
the Rower is standing in the vertical position so for the moment,
simply align and loosely thread lower bolts/nuts.
REQUIRED
Mainframe [1]
Side Rails Assembly [2]
16x M8 Washers [7]
8x M8 Standard Nuts [8]
8x Nyloc Nuts [9]
8x M8 x 45mm Bolts [11]
Bolt Assembly Close Up
M8 Standard Nut
M8x45mm Bolt
M8 Washer
M8 Nyloc Nut
CAUTION
Nyloc nuts must be
outside the standard nut
and washer to properly
secure assembly.
Note: Clean wheels and
tracks weekly with a soft
dry cloth in order to
decrease the rate of wear
on both wheels and track.
Nyloc
Nuts
Nyloc Nuts must be
outside the standard nut
and washer to properly
secure assembly.
Nyloc
Nuts
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree Viking Pro XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree Viking Pro XL in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info