Manual First Degree VIKING PRO V 2019 (page 11 of 28) (English)

737299

Zoom out

Zoom in

1/28

Assembly Instructions

Once the Bungee Cord is attached to the Rear

Brace, tighten the bolts holding the Footboard,

the Mainframe to Side Rail Bolts as they are

easier to access from the vertical position.

Lower the Rower back to the Horizontal position

and test for proper bungee recoil.

Check Seat Rollers/Runners for dirt or debris

before sitting on the rower seat. Small objects

captured between the seat rollers and runners

can damage the wheels or running surface.

Check runners for debris prior to each use and

clean regularly.

Note: The Rower Frame Bolts require periodic

checking for tightness. Do this at the end of the

first month of use and again after every 12

months

Choose a suitable location when standing the

product for storage.

The Rower frame can be polished with any high

grade furniture polish to further highlight the

rich luster of the wood finish.

Install supplied 2x AA Duracell battery and

check computer function. Details regarding

can be found in the Computer section of this

manual.

Choose a flat, level surface on which to use your

Rower, to avoid rocking and potential premature

wear.

Pull Bungee Cord and Hook Bungee End onto

the Bungee Hook Mount[5] as shown.

Do not cut Bungee

tie wrap before

Bungee cord is

attached to rear

of rower as shown

here.

STEP 4

Completing the Rower Assembly

Tighten Frame

Bolts securely

once rower is

standing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of First Degree VIKING PRO V 2019 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

First Degree VIKING PRO V 2019 Manual

Product: