671469
10
Zoom out
Zoom in
Previous page
1/27
Next page
10
Assembly Instructions
Install the M10x180mm Vertical Seat Rail Tensioning
Bolt[12] with the Plastic Dome Cap[11] through the
Seat Rail as shown, then fit the Vertical Seat Rail bolt
Dampener[8] onto the bolt between the bottom of the
Seat Rail and the Lower Frame (not shown) before
securing the bolt with M10 Nyloc Nut[17] and M10
Washer[9].
WARNING
Do not tighten the Vertical
Frame Tensioning Bolt. See
the step 6 for details once
assembly is complete
2
REQUIRED
Vertical Seat Rail Bolt
Dampener [8]
M10 Washer [9]
Plastic Dome Cap [11]
M10 x180mm Bolt [12]
M10 Nyloc Nut [17]
STEP 5
Installing the Seat Rail to Mainframe
STEP 6
Fine Tuning the Rower
The Vertical Seat Rail Tensioning Bolt is designed to hold the mid leg 3-5mm off the
ground when the Fluid Rower is unweighted, and just slightly touch the ground during a
rowing stroke.
Tighten the assembly until the Mid Leg begins to lift off of the ground as shown below.
Note: If excessive head shaking/hopping of the tank occurs during rowing, this indicates
the Vertical Seat Rail Tensioning Bolt being out of adjustment.
3-5mm off the floor is ideal
Close up view of the Vertical
Seat Rail Tensioning Bolt M10
Nyloc location.
Tension the Vertical Seat Rail
Tensioning Bolt as shown here.
And with the Multi-Tool here
Adjust Vertical Frame
Tensioning Bolt using the
Allen Key here
Plastic Dome Cap
M10x180mm Bolt
M10 Washer
M10 Nyloc Nut
Vertical Seat Rail
Bolt Dampener
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree PACIFIC AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree PACIFIC AR in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info