671465
9
Zoom out
Zoom in
Previous page
1/26
Next page
9
Assembly Instructions
STEP 2
Mounting Rower Seat and Upper Mainframe
REQUIRED
Left / Right Side Rail [2]
Rower Seat [3]
To Install the rower seat, spread the Left/Right Side Rails[2]
slightly and drop the Rower Seat[3] into the track.
Note: Seat indentation must face rearward.
STEP 3
Next, install the Mainframe[1] onto the Side Rail Assembly as
shown. You will need 4x M8x40mm Bolts[10], 2x M8x35mm
Bolts[9], 6x M8 Washers[6], and 4x M8 Nylock Nuts[7].
Note: One washer on outside .
Secure but do not tighten. You may find that the Lower
Bracket Bolts can be difficult to access. You can tighten
these bolts completely once the Rower is standing in the
vertical position so for the moment, simply align and loosely
thread lower bolts/nuts.
CAUTION
Nyloc nuts must be outside
the standard nut and
washer to properly secure
assembly.
Note: Clean wheels and
tracks weekly with a soft
dry cloth in order to
decrease the rate of wear
on both wheels and track.
2
REQUIRED
Mainframe [1]
Side Rails Assembly [2]
6x M8 Washers [6]
4x Nyloc Nuts [7]
2x M8x35mm Bolts [9]
4x M8x40mm Bolts [10]
Left/Right Side Rails
Rower Seat
Seat Indentation
M8 Nylock Nut
M8 Nylock Nut
M8x40mm Bolt
M8x35mm Bolt
M8 Washer
M8x40mm Bolt
M8 Washer
M8 Washer
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree MONACO AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree MONACO AR in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info