671487
13
Zoom out
Zoom in
Previous page
1/22
Next page
13
Operation Instructions
Chain Tensioning Bolts: Allows for tightening the chain or adjustment from side to
side. Make sure when tightening only to adjust the same amount for both bolts,
otherwise the sprocket will be misaligned.
Note: Tightening the right bolt only (turning clockwise) will pull the right side of the
crank assembly toward you, tightening the left will pull the left side toward you.
Use this feature to realign the rear with the front sprocket if needed or when
changing to a new chain.
E920 Control Arm
Handgrip: Loosen knob to adjust
handle position from 0-90 degrees.
Crank Arm Bolts: Loosen all 8
bolts slightly before adjusting/
tightening chain.
Inspection plate: Open to check
chain tension.
With a screwdriver or other
implement, check tension just
behind front sprocket.
Note: A properly adjusted chain
will have 3mm-5mm of slack only.
See top of page for adjustment
details.
Warning: Do not check
chain tension by fingers!
Adjustment Knob: Loosen to
allow the control arm to travel
through 90 degrees of travel.
Note the Telescoping Tube is
gas assisted.
Tighten securely when desired
workout position is reached.
E920 Slider Arms: Refer
to following assembly page.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree EVOLUTION E920 MEDICAL UBE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree EVOLUTION E920 MEDICAL UBE in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info