671481

First Degree EVOLUTION E720 CYCLE XT Manual

9
Zoom out
Zoom in
Previous page
1/17
Next page
9
Assembly Instructions
STEP 3
Assembly Upper Seat Frame and Lower Seat Frame
a) Upper Seat Frame[3] onto Mainframe[1] and secure using
1x M10x25mm Bolt[10],1x M10 Nyloc Nut[14], 2xM10
Washers[12], M10 Plastic Washer[13] and L-pin[6].
Note: Tighten the
M10x25mm Bolt, Washers
and Nylock until lightly snug
only. Over-tightening will
prevent the seat from
rotating. Use the L-pin to
tighten the Upper Seat
Frame once rotated into
place.
STEP 4
Assembly Right Crank Pedal
12
a) Secure Right Crank Pedal[8] onto Crank arm. The pedal
threads have a blue coating which will feel very tight when
threaded onto the crank arm. This is a type of thread
locker, and once in contact with the crank arm threads
will activate in approximately 15minutes.
2
REQUIRED
Right Crank Pedal [8]
CAUTION
Extreme over-tightening
could damage the aluminum
threads on the crank arm
Note: Allow 15 minutes
for the thread-locker to
activate before first time
use.
Check pedal tightness on a
regular basis and tighten
as needed with a 15mm
wrench.
Right Crank Pedal
M10x25mm Bolt
M10 Washer
Before installing
the Upper Seat
Frame onto the
Lower, use the
supplied grease
and apply liberally
between the two
sliding surfaces
L-Pin
M10 Plastic Washer
lubricating grease
M10 Nylock Nut
REQUIRED
Mainframe [1]
Upper Seat Frame [3]
L– Pin [6]
M10 x 25mm Blots [10]
2 x M10 Washers [12]
M10 Plastic Washers [13]
M10 Nyloc Nuts [14]
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree EVOLUTION E720 CYCLE XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree EVOLUTION E720 CYCLE XT in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info