671464
8
Zoom out
Zoom in
Previous page
1/26
Next page
8
Assembly Instructions
Rear Brace Assembly
Note: After secure the rail bolts, tighten bolts under the Rear Brace.
Tip : If you encounter difficulties in inserting
the side rail into rear brace, adjust the
metal cross bracket to leave a gap on both
side. Note: Secure but do not tighten.
STEP 1
a) Install the Side Rail Left[2] and Side Rail Right[2] using
4x M8x40mm Bolts[10] , M8 Washer[6], 4x M8 Nyloc
Nuts[7] and Rear Brace[4].
b) Once the Rear Brace and Side Rails are assembled,
mount the Transport Wheel Assembly[5] onto the Left/
Right Side Rails[2].
Note: One washer on outside and one washer on the inside
of the side rail.
Tip: Bumpstops facing inside of rail for correct assembly
orientation.
Installing the Rear Brace and Transport Wheel
Assembly to Seat Rail
REQUIRED
Seat Rail [2]
Rear Brace [4]
Transport Wheel Assembly [5]
4x M8 Washer [6]
4x M8 Nyloc Nuts
4x M8x40mm Bolts [10]
Transport Wheel Assembly
Side Rail Right
Bumpstop
Rear Brace
Side Rail Left
M8 Washer
M8 Nyloc Nut
M8x40mm Bolts
Note: Transport wheels must be
mounted on the outside of Side Rails
as pictured above.
M8 Washer
Transport Wheel Assembly
M8 x 60mm Bolt
M8 Nylock Nut
M8 Washer
Transport Wheel
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree AQUA AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree AQUA AR in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info