Manual First Degree APOLLO PRO II (page 18 of 23) (English)

671459

Zoom out

Zoom in

1/23

Reattaching the Rower Belt

STEP 1

STEP 2

Velcro Facing Upward

Begin reattaching the Rower Belt by threading

around the Rower Belt Pulley with the Velcro side

facing upward as illustrated.

Idle Wheel

Next, thread the Belt around the Idle Wheel as

shown. Once around the Idle Wheel, attach the

Rower Belt to the Belt/Bungee Pulley. There is

an obvious “lip” at the attachment point.

Rower Handle

Belt/Bungee Pulley

STEP 3

STEP 4

STEP 5

Wind the Rower Belt onto the Belt/Bungee Pulley

until the Rower Handle is as it’s furthest forward

position.

Bungee Shock Cord

Bungee Pulley

Rethread the Bungee Shock Cord (on opposite

side of the Idle Wheel) back through the Bungee

Pulleys and tie off at the Attachment Point.

Recoil tension will decrease over time as the Bungee Shock Cord

stretches. To increase recoil tension, simply push the Inner Clip

out of the Bungee Hook from behind, pull the required amount of

bungee through the Inner Clip and replace the Inner Clip into the

Bungee Hook as shown below.

Hint: Before reattaching the Inner Clip/

Bungee Hook, tie a slip knot under slight

tension at the lower bungee pulley. This

will keep the bungee under tension while

reassembling the Bungee Hook.

Bungee Hook

Inner Clip

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of First Degree APOLLO PRO II in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

First Degree APOLLO PRO II Manual

Product: