795123

First Alert OneLink - 1042136 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Modular Devices FCC and Industry
Canada Compliance Statements
OEM Responsibilities to comply with FCC and Industry Canada Regulations
The BLEMOD1 Module and AW-CU300 Module have been certified for integration into products only by
OEM integrators under the following condition:
1. The transmitter module must not be co-located or operating in conjunction with any other
antenna or transmitter.
As long as the condition above is met, further transmitter testing will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
!
IMPORTANT: In the event that these conditions cannot be met (for certain configurations or co-
location with another transmitter), then the FCC and Industry Canada authorizations are no longer
considered valid and the FCC ID and IC Certification Number cannot be used on the final product.
In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC and Industry Canada authorization.
End Product Labeling
The BLEMOD1 Module and AW-CU300 Module are labeled with their own FCC ID and IC Certification Number.
If the FCC ID and IC Certification Numbers are not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label referring to the
enclosed module. In that case, the final end product must be labeled in a visible area with the following:
“Contains Transmitter Modules FCC ID: M7U-BT1IOT and FCC ID: TLZ-CU300”
“Contains Transmitter Modules IC: 10190A-BT1IOT and IC: 6100A-CU300”
Or
“Contains FCC ID: M7U-BT1IOT and FCC ID: TLZ-CU300” “Contains IC: 10190A-BT1IOT and IC: 6100A-CU300”
The OEM of the BLEMOD1 Module and AW-CU300 Module must only use the approved
antenna(s) listed above, which have been certified with this module. The OEM integrator has
to be aware not to provide information to the end user regarding how to install or remove this
RF module or change RF related parameters in the user manual of the end product.
To comply with FCC and Industry Canada RF radiation exposure limits for general
population, the antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert OneLink - 1042136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert OneLink - 1042136 in the language / languages: English as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info