795122

First Alert OneLink - 1042135 Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
19
Weekly Testing
!
WARNING: NEVER use an open flame of any kind to test this unit. You might
accidentally damage or set fire to the unit or to your home. NEVER use vehicle
exhaust! Exhaust may cause permanent damage and voids your warranty.
!
WARNING: DO NOT stand close to the Alarm when the horn is sounding. Exposure at close
range may be harmful to your hearing. When testing, step away when horn starts sounding.
!
CAUTION: It is important to test this unit every week to make sure it is working properly.
Using the test button is the recommended way to test this Smoke/CO Alarm.
!
WARNING: Test device operation after vehicle has been in storage, before each trip,
and at least once per week during use.
You can test this Smoke/CO Alarm by pressing and holding the Test/Silence button
on the Alarm cover until Alarm Voice says “Testing” (typically 3-5 seconds).
During testing, you will see and hear the following sequence:
• “The Alarm Voice will say “Testing Alarms… The Alarm will sound and for your protection is very
loud. This may take a few seconds.” The LED chases Blue. The Alarm Voice will say “Testing Smoke.”
The Horn will sound 3 beeps, twice. The LED chases and flashes Red. The Alarm Voice will say
“Evacuate, Evacuate, there’s Fire in the [Location. Example: “Kitchen”].” The LED flashes green.”
• “Next, the Alarm Voice will say “Testing Carbon Monoxide.” The Horn will sound 4 beeps,
twice. The LED chases and flashes Red. The Alarm Voice will say “Evacuate, Evacuate,
there’s Carbon Monoxide in the [Location. Example: “Kitchen”].” The LED flashes green.
The Alarm Voice will say “Highest carbon monoxide level was 0 PPM.” The LED chases Blue.
The Alarm Voice will then say “The testing is almost complete.” After a pause, the Alarm
Voice will say “The test is done, and you are protected.” The LED flashes green.
If the unit does not alarm, make sure it has been activated correctly, and test again. If the unit still
does not alarm, replace it immediately.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert OneLink - 1042135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert OneLink - 1042135 in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info