795162
77
Zoom out
Zoom in
Previous page
1/104
Next page
Page 77
Checking HDD Status
To check the status on the installed HDDs, enter
the HDD Information interface:
Menu > HDD > General.
NOTE:Normal or Sleeping status means
the HDD is working normally.
Uninitialized or Abnormal means
the HDD needs to be initialized or
possibly replaced.
HDD Detection
To detect the HDD with the S.M.A.R.T. (Self-
Monitoring, Analysis and Reporting Technology),
enter the S.M.A.R.T. Settings interface: Menu >
Maintenance > HDD Detect.
Select the HDD to view its S.M.A.R.T. information.
The related information of the S.M.A.R.T. is shown on
the interface.
Choose self-test types as Short Test, Expanded
Test, or the Conveyance Test. Click Star” to start the
S.M.A.R.T. self-evaluation.
NOTE:If you want to use the HDD even when the S.M.A.R.T checking
is failed, you can check the checkbox of the Continue to use
the disk when evaluation is failed item.
To detect the HDD with the Bad Sector Detection:
1. Select the Bad Sector Detection tab.
2. Select the HDD number.
3. Choose All Detection or Key Area Detection as the Detection type.
4. Click Detect.
HDD MANAGEMENT
1. Enter the System Information Interface:
Menu > Maintenance > System Info.
2. Click the HDD tab to view the status of each
HDD displayed on the list.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info