795162
74
Zoom out
Zoom in
Previous page
1/104
Next page
Page 74
5. Select HDD from the list and click icon to enter the Local HDD settings interface.
6. Select the Group number for the current HDD.
NOTE:The default group No. for each HDD is 1.
7. Click OK to confirm the settings.
8. Click Yes to finish the settings.
Setting HDD Property
Before you start
Set storage mode to Group before setting the HDD property.
Enter the HDD Information interface:
Menu > HDD > General.
1. Select HDD from the list and click the icon to enter the
Local HDD Settings interface.
2. Set the HDD property to either R/W, Read-Only, or
Redundancy. 3. Click Apply and then the OK button.
NOTE:Read-only to prevent recorded files from being
overwritten when the HDD becomes full in overwrite
recording mode.
NOTE:Redundancy allows video to be recorded both onto
the redundancy HDD and the read/write HDD
simultaneously to ensure high security and reliability
of video data.
NOTE:At least two hard disks must be installed on the NVR
when the HDD is set to Redundancy and one is set to
R/W.
HDD MANAGEMENT
3. Click Apply and then the OK button.
4. In the HDD Information menu, the HDD property
will be displayed in the list.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info