795162
55
Zoom out
Zoom in
Previous page
1/104
Next page
Page 55
Hot Spare Device Backup
BACKUP
Setting Hot Spare Device
Enter the Hot Spare Settings interface:
Menu > Configuration > Hot Spare.
1. Set the Work Mode as Hot Spare.
2. Click Apply.
3. Click Yes to reboot device.
Before you start
At least two devices must be online. A bidirectional
connection is required to be built between the hot
spare device and each working device.
Set a hot spare
device
Add a hot spare
device on normal
device
Add the normal
device on the hot
spare device
Start Finish
Setting Working Device
Enter the Hot Spare Settings interface:
Menu > Configuration > Hot Spare.
1. Set the Work Mode as Normal (default).
2. Check Enable.
3. Enter IP address and admin password of hot spare device.
4. Click Apply.
NOTE:The camera connection will be disabled
when the device works in hot spare mode.
It’s highly recommended to restore the
defaults of the device after switching the
working mode of the hot spare device
to normal mode to ensure the normal
operation afterwards.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info