795162
16
Zoom out
Zoom in
Previous page
1/104
Next page
Page 16
Powering your NVR
Make sure the voltage of the extra power supply meets the NVR’s requirement and that the ground connection
is working properly.
INITIAL SETUP
Starting Up
1. Make sure the power cord is properly plugged into an electrical outlet.
Using an Uninterruptible Power Supply (UPS) is highly recommended. The
Power indicator LED on the front panel will display red when the device has
power.
2. Press Power on the front panel. The Power indicator will display blue
when the device starts.
3. After startup, the Power indicator should remain green. The following
screen will appear with the status of HDD. The row of icons at the bottom
of the screen shows the HDD status. “X” means the HDD is not installed or
cannot be detected.
Shutting Down
There are two options for shutting down the NVR.
Standard Shutdown:
1. Menu > Shutdown
2. Shutdown
3. Yes
Front-Panel Shutdown:
1. Press and hold Power for three seconds
2. Enter administrator’s username and password in dialog box
3. Click Yes
Rebooting
1. Menu > Shutdown
2. Reboot
NOTE:The Logout button will lock the NVR.
Start Up and Shut Down
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info