795164
13
Zoom out
Zoom in
Previous page
1/24
Next page
Page 13
Alarm Inputs:
Alarm inputs are switches that activate when a
door, window, cabinet etc. is opened or accessed.
For example, you might want to only have the
camera record when someone opens a tool cabinet
or when a door opens vs. recording when motion
occurs around those areas. There may be people
moving by those areas frequently but you are only
concerned about when those areas are accessed.
This saves storage space and makes it easier to
find an event that was recorded.
External Sensor Alarm Pattern:
5 Seconds ON 3 Seconds OFF repeat...
Motion Alarm Pattern:
2 seconds on
NOTE: The Maximum output current is 300mA and the
Maximum Output voltage is 5.0V.
NOTE: When using external sensor you must program the
view location on program 2. When external sensor is tripped
the camera will move to the preset location.
To Connect an external Sensor
to the DWIP-720
Connect GND (-) of Sensor to ALARM IN 4(-) of the DWIP-720.
Connect NO (+) of Sensor to ALARM IN 3(+) of the DWIP-720.
To Connect an external Alarm
to the DWIP-720
Alarm output is used to activate an external device such as
a horn or LED or relay after an alarm is triggered. To configure
alarm outputs, connect the external device to the out
connections on the alarm block as required by the device.
Connect (-) of ALARM to ALARM IN 2(+) of the DWIP-720.
Connect (+) of ALARM to ALARM IN 1(-) of the DWIP-720
Alarm Block Functionality
Preset Positions must be configured for the Alarm Block
features through the software. When an Alarm is detected,
the camera will enter in the default Alarm position. To change
this default Alarm position you must first set the camera’s
position, click “Set Preset Position” in the software and
choose the Alarm Block. There are a total of 8 preset
postitions that can be created for the Alarm Block.
1. Click settings in the upper left screen.
2. In the Local Alarm Alerts Tab, check “Local
Alarm record”, and check “local Alarm
capture”. Set the times for each.
3. Click OK. Set the Motion recording the
same way in the previous step for SD Motion
recording set up.
4. Files can be viewed in the Playback option in
the upper left.
PROGRAM FUNCTIONS
ALARMS
Alarm Setup on PC
Alarm Setup on PC:
1 2 3 4
-- - -+ + ++
1. ALARM OUT -
2. ALARM OUT +
3. ALARM IN +
4. ALARM IN -
ALARM
IP CAMERA
SENSOR
NC: NORMALLY CLOSED
NO: NORMALLY OPEN
NO
GND
5vdc 300 MA MAX
Alarm Connections
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DWIP-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DWIP-720 in the language / languages: English as an attachment in your email.

The manual is 1.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info