795156
8
Zoom out
Zoom in
Previous page
1/99
Next page
Page 8
RS-485 Device
VGA Cable
HDMI Cable
PRODUCT OVERVIEW
Camera and Power Connections
IR Dome Camera
USB Mouse
Ethernet to
Internet
BNC Cable with
Video & Power
Additional Cameras can
be Connected from Power
Splitter with BNC Cables
Tablet & Smartphone App
Installing Cameras
Follow this diagram to make device connections. Note, some
devices are not included with this kit. See “What’s in the Box” for
included devices.
Connecting Devices
Installing Cable-Safe Mounting Bracket
Decide if the camera is to be wall or ceiling mounted and if cable will be
fed through mounting surface hidden directly behind the bracket or fed
through the side of the bracket so cable is exposed. Mark area where
you will drill your hole. The Cable-Safe Mounting Bracket has three
Adjusting Points. 1) Rotates Bracket 360° relative to mounting surface, 2)
Adjusts bracket hinge 180° and 3) Rotates camera body 360° to
level image.
Step 1: Select the position for the camera and drill your hole for the
cable. Feed cable through mounting surface. Mount bracket to surface.
Step 2: Aim camera at target and using Adjusting Points 1 and 2 in
tandem position camera. Tighten Ring and Thumb Screw.
Step 3: Rotate camera body using Adjusting Point 3 to the proper view
angle making sure the Camera Shield is always on top and parallel to
the ground so the image is level in the Live View Screen. See “Camera
Orientation” Info box. Tighten screw.
Step 4: Attach proper length of cable and run from camera to DVR
location. Note: Power cable ends are different. Be sure the correct
power connector end matches “To Camera” or “To DVR”. Tip - Connect
cable at camera end before running cable to verify orientation is correct.
Also, see Information box on “Longer Cable Runs”.
Step 5: Check camera orientation via the Live View screen.
Adjust as required.
Use First Alert
Power Supply
Only
Power
Splitter
Power
Splitter
Use First Alert Cameras Only
RCA Audio Out to
Powered Speakers
(Not included)
RCA Audio In from Audio
Cameras or Powered
Microphone (Not included)
PTZ & Alarm Connections
(Cameras not included)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DVRAHD-1620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DVRAHD-1620 in the language / languages: English as an attachment in your email.

The manual is 7.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info