795155
29
Zoom out
Zoom in
Previous page
1/99
Next page
Page 29
RECORDING SETTINGS
Check the storage mode of the HDD: Menu > HDD > General.
1. Click Advanced
2. If HDD mode is Quota: Set maximum record capacity and
maximum picture capacity. If HDD mode is Group: Set the
HDD group.
Configure encoding parameters to define image quality
including stream type and resolution. Enter the Record
Settings interface to set recording parameters:
Menu > Record > Parameters.
1. Configure parameters according to table below. (this option
is only available when the HDD mode is Group) and whether
you want to record audio.
2. Click Apply.
Configuring Encoding Parameters
Before you start
Make sure the HDD has already
been installed and initialized.
Setting Function
Pre-Record Time set to record before a scheduled event
Post-Record Time set to record after a scheduled time or event
Expired Time The longest time for a record file to be kept in the HDD
before deleting. “0” will keep a file from being deleted.
Redundant Record Enable to save record and captured picture in redundant HDD
Record Audio Enable / Disable audio recording
Video Stream Choose between main stream or sub-stream (Sub-stream
allows longer record time with the same storage space)
Enable 960 Mode
Only supported by analog cameras. Enabling the 960 mode to
enable the WD1 resolution for the main stream, otherwise, the reso-
lution supports up to 4CIF. And the option does not supported by TVI
cameras, while the WD1 resolution is available all the time.
To set sub-stream parameters, enter sub-stream tab page.
1. Use the dropdown lists to set each parameter.
2. Click Apply.
NOTE:(Optional) If the parameters can also be
used for other cameras, click Copy to copy the
settings to other channels.
You can Copy the same settings
to the cameras with same signal,
e.g., the channel No. 1-3 connect
to the TVI cameras, and the channel
No.4 connects to an analog camera, and
then the settings of channel No. 1 can
be only copied to channel 2 and 3.
NOTE:
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DVRAHD-0820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DVRAHD-0820 in the language / languages: English as an attachment in your email.

The manual is 7.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info