795161
22
Zoom out
Zoom in
Previous page
1/47
Next page
Page 22
Email Tip
Depending upon your settings, the system can generate a lot of email alerts. For that reason, we recommend
setting up a dedicated email address specifically for the Security System alert notices. Also to better manage
your alerts, you will want the alert emails to go to a different account than the one sending them.
ADVANCED OPERATION
ALARM
Advanced Setup
Use the ADVANCED SETUP menu to configure alarm settings,
lookup version information, set motion detection, mobile
surveillance, maintain system parameters, set PTZ configurations
and network settings. The Advanced Setup menu contains
the following sub-menus: Alarm Set, Version, Motion Detect,
Mobile Monitor, Auto Maintain, PTZ Config, and Network
Alarm
Alarm and Email Options:
To access Alarm the ALARM menu, choose ADVANCED from the Main
Menu and then select ALARM SETv. NOTE: External alarm devices must
be connected to the alarm block on the rear panel of the DVR in order to
use the I/O (input/ output) alarms of the system. See next section “Alarm
Inputs” and “Alarm Inputs Diagram” for details on attaching alarm inputs.
To configure alarm settings:
1. To activate Loss Alarms use drop down menu and select ON/OFF:
• HDD LOSS: The alarm will sound if the internal
HDD is missing when DVR is started
• DISK NO SPACE: The alarm will sound when the HDD
is full (overwrite must be disabled)
• SHOW VIDEO LOSS: The alarm will sound
when a camera is disconnected
2. Under I/O CHANNEL, select Normal Open, Normal Closed, or
STOP for Alarm input. There are 4 alarm inputs. Alarm Input 1
on Alarm Block controls CH1 1 (Camera 1). Scroll down to view
additional channels. Note: If in the RECORD screen, a Channel
is set to OFF, ALARM is also disabled for that Channel.
3. Under SEND Email and SHOW MESSAGE, select
ON or OFF to activate this option.
4. If MAIL is selected, click on the MAIL button and then fill in the
email information necessary for an email to be sent when the alarm
is detected.
Email Setup:
The system can send an email notification for triggered
events on the system. To setup email notification:
1. Under Email, select ENABLE.
2. Under SMTP SERVER enter the SMTP address of your
email server. For example, smtp.gmail.com
3. Under PORT, enter the SMTP port of your email server.
4. Check SSL (SECURE SOCKET LAYER) if needed. SSL deals with
encryption. Only advanced users should enable this option.
5. Under USER NAME, enter the email server user’s name.
6. Under PASSWORD, enter the password of your email server.
7. Under SENDER, enter the sender email address.
8. Under RECEIVER, enter the email address that
will receive the email notification.
9. Click OK.
Please check with your email service provider’s website for SMTP
server port information and if SSL needs enabling.
Advance Setup Menu
Alarm Setup Menu
Email Setup Screen
Alarm Status
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DVR0810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DVR0810 in the language / languages: English as an attachment in your email.

The manual is 3.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info