795161

First Alert DVR0810 Manual

18
Zoom out
Zoom in
Previous page
1/47
Next page
Page 18
BASIC OPERATION
RECORDING
Recording
RECORD Mode
Configure Recording Options:
You have three recording modes: Schedule, Manual and Stop.
By default, the DVR is set to record by schedule.
To set the recording options, right click from the mouse and click on RECORD
MODE. There you can select amongst the three options for each individual
channel. Or you can highlight ALL to make a change to all channels at once.
SCHEDULE: System will record according to schedule that is set.
MANUAL: System always records. System records
not matter what settings are in place.
STOP: System does not record , no matter what other parameters are set.
RECORD Settings
In order to set the record settings, from the Main Menu,
click RECORD. Set parameters as follows:
1. Under RESOLUTION, select CIF, HD1, or D1 or QCIF. NOTE:
Channels 1 & 2 allows options D1, HD1, CIF and QCIF.;
Channels 3-8: allow settings of CIF and QCIF.
2. FRAMERATE: Choose the recording frame rate 1-30, (fps – frames per
second). The lower the value, the less life-like and more jerky the recorded
movements will be. However, a lower frame rate uses less HDD space.
Make your choice depending on the precision with which you want to follow
the events being recorded. Frame-rate of each channel can be adjusted
but is limited by the total resources available. The total frame rate for all
channels combined cannot exceed 420 (NTSC) fps. The ratios of D1, HD1
and CIF are as follows: 1 D1= 4 x CIF, 1 HD1 = 2 x CIF.QCIF=1/4 CIF.
3. QUALITY, The quality rating is on a 6 point scale.
The selections are 6-High, 5,4,3,2,1-Low.
4. AUDIO, select On to enable or disable. If audio recording is enabled, the
system will record audio from connected audio capable cameras (not
included). See caution statement on audio recording in Video section.
Detailed Settings for RECORD Mode:
Select RECORD CONFIG. The RECORD CONFIG screen will appear. From
this screen, you have the ability to select a schedule or manually record. Also,
you may select to stop recording, which will disable the recording feature.
To schedule a recording:
1. Select a channel and then highlight SCHEDULE
2. Set the Period Times for up to 4 period settings by using the virtual
mouse and setting the start and stop times for each period.
3. Click check box for SCHEDULE, DETECT(motion detect) or ALARM
to enable the appropriate recording type. Click NEXT PAGE to
adjust cameras 5 through 8. Click OK to save and exit.
4. Copy the setting (if desired) to another or all channels as desired.
5. Click OK. to save settings.
6. Record Size: Using the virtual mouse, set
the RECORD SIZE from 1-120 minutes.
7. Click ok to confirm selections. Audio/Video Recording
Caution: Audio surveillance in some states is illegal
or requires permission from one or both parties to
record someone’s voice. Laws are also different
from residential vs. commercial applications. Some
federal, state, and local laws prohibit certain surveillance activi-
ties and/or the use or distribution of the information obtained from
such activities. Prior to using this system, you should become
familiar with the pertinent laws to ensure compliance with those
applicable to surveillance activities.
Record Mode
Record Configuration
Record
Main Menu
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DVR0810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DVR0810 in the language / languages: English as an attachment in your email.

The manual is 3.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info