795157

First Alert DC4405-420 Manual

34
Zoom out
Zoom in
Previous page
1/56
Next page
Page 34
Configuring ActiveX Control in Internet Explorer 8:
1. Open Internet Explorer 8
2. Click on Tools
3. Select Internet Options in the pull-down menu
4. Click on the Security Tab
5. Select Trusted Sites
6. Click on the Sites button
7. Uncheck the “Require server verification (https:)
for all sites in this zone” button.
8. Type the DVR’s IP address (obtained during Network Setup) or DDNS
domain name (obtained through DynDNS.com setup) into the “Add this
website to the zone:” box.
9. Click the Add button
10. Close the window.
11. Back in the “Security Tab” screen,
click the “Custom level…”button.
12. Pull down the “Reset to:” menu
button and select “Low”
13. Click the “Reset...” button
14. Click “Yes” when asked, “Are
you sure you want to change
the setting for this zone?”
15. Click OK
16. Click Apply
17. Click OK
18. Close Internet
Explorer. You are now
ready to access the DVR using Internet Explorer 8.
Using Remote Surveillance:
With your system connected to your local area network, you can now log in to your
system using Internet Explorer.
The software from the DVR will install the first time you access the DVR through Internet Explorer and will allow you to
operate the network remotely. The DVR supports access over LAN and WAN, also supports IP and domain name access.
Logging Into Your System Remotely
With your IP address, you can now log in to your system
over your local or wide area network.
1. Open Internet Explorer. In the address bar, enter the IP
address of your system (i.e. 192.168.3.97).
2. You must install the ActiveX® in order to access your system.
Click the attention bar at the top of the main page and select
Install ActiveX Control. DVR Net viewer will reset.
3. In the warning box click Install. The login page appears.
Leave the password field blank (default). NOTE: If you have
enabled passwords on your system, enter your USER or
ADMIN password. However, only the ADMIN can change settings and options on the system.
4. Select LAN or INTERNET from the drop-down menu and click LOGIN.
Internet Options-Security Screen
Trusted Sites
Security Settings
Setup Required Prior to Remote Access
NOTE: Your system must be connected to your LAN or WAN, Windows and Internet Explorer must be configured
as described in the previous sections Configuring Windows “User Account Control” and Configuring Active X
Control in Internet Explorer 8 and the DVR settings must have been setup properly as described in the Network
Setup for Remote Access section before attempting remote access.
Remote Surveillance-Login Screen
REMOTE Access
Remote Surveillance
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DC4405-420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DC4405-420 in the language / languages: English as an attachment in your email.

The manual is 5.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info