795214
22
Zoom out
Zoom in
Previous page
1/26
Next page
18
Troubleshooting
Problem Possible Causes Remedies
System message
shows “No Signal” No power supply to
camera If camera power status indicator light is off,
check power adapter and power cable
connection.
Channel is not synched
up to camera Move the camera closer to the receiver, and
connect the camera to the desired channel. Go
to “Camera Setup” in the Menu. Use the
“Pairing” sub-menu to connect the camera to
the receiver.
Service out of range Move the camera closer to the receiver.
Signal is blocked If possible, remove major obstacles in
between the camera and the receiver. Or,
relocate the camera to another location.
Low or unstable
signal Antenna direction is
limited Adjust the camera antenna and receiver
position
Signal has been blocked If possible, remove major obstacles in
between the camera and receiver. Or, relocate
the camera to another location.
Strong radio signal
nearby Keep WIFI router away from the camera
and/or receiver.
Strong electromagnetic
interference nearby Keep active appliances such as hair dryers,
heat fans, air conditioners, water pumps, or
microwave ovens away from the camera
and/or receiver.
Channel(s)
disappear during
auto or manual scan
Scan channel(s) has been
turned OFF Go to Menu; turn ON the channel(s).
Dim or overly bright
image at night time Low light vision distance
is too short/too far Adjust the camera to have the view fit the
ideal distance: 15 to 24 feet.
Recording does not
work No SD Card Insert SD Card.
SD Card locked Unlock the SD Card.
Motion detection
does not work Motion Detection record
time is set to OFF Always set Motion Detection record period to
5 sec, 10 sec, or 15 sec.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert D-575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert D-575 in the language / languages: English as an attachment in your email.

The manual is 0.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info