795130
5
Zoom out
Zoom in
Previous page
1/8
Next page
78
EMERGENCY OVERRIDE KEY/BATTERY
REPLACEMENT
1 Locate and open the protective keypad cover on the front of the safe.
2 Using a small Phillips head screwdriver, remove
the two screws securing the small Emergency
Override Key lock cover located just below the
digital keypad. Pull forward on the cover to
remove and set aside with the small screws.
3 Insert the Emergency Override Key into the lock and turn clockwise to the right.
4 Turn the handle upwards to the right to open the safe.
NOTE: IF BATTERIES NEED REPLACING, PROCEED WITH STEP 5.
OTHERWISE, PROCEED TO STEPS 6-8.
5 Slide the battery compartment cover (located inside the safe at the top of
the door) forward and remove. Remove and properly dispose of the four (4)
nonworking batteries. Install four (4) new AA batteries. Make sure the batteries
are installed in the proper direction as indicated in the battery compartment.
Slide the cover back into place.
6 Remove the Emergency Override Key, and before replacing the lock cover, enter
your personal passcode to make sure the safe will open.
7 Replace the lock cover using the two small screws and return the Emergency
Override Key to a secure place away from the safe.
8 Close and lock the safe door by turning handle downward to the left.
ADDITIONAL FEATURES
SHELF
To allow for greater exibility and further accommodate your
particular storage needs, this safe includes one (1) adjustable/
removable shelf.
1 Position shelf so that the gripping ridges are on the top
and towards the front of the safe.
2 Locate the approximate position in the safe where you
would like to place it and, using the guides molded into
the walls of the safe, slide the shelf into place.
Emergency Override Key / Battery Replacement / Additional Features Use Care and Maintenance
LOW BATTERY INDICATOR
Every time the keypad is activated, the system automatically
checks the power level remaining in the batteries. If the
power falls below a certain level, the red light will ash every
two seconds to indicate the need for new batteries.
BOLTING DOWN YOUR SAFE
For added security your safe can be bolted to the oor. With Ready-Seal™ Technology
you are able to bolt your Fire Safe to the oor without compromising the re or water
protection. Please refer to the separate Ready-Seal Mounting Instructions included in
this package.
DISABLE / ENABLE SOUND
1 To enable (turn on) the sound during normal
operation, press the following key sequence:
2 Repeat the process to turn the sound o.
USE, CARE AND MAINTENANCE
APPROPRIATE USE OF YOUR SAFE
First Alert® Waterproof and Fire Resistant Safes protect paper records and
many other valuables.
Veried re
protection for:
This product is NOT INTENDED to protect audio or video cassettes, oppy discs, data
cartridges, lm and photos or photo negatives from re.
Testing shows that the interior temperature of the safe remains below
350°F for one (1) hour during a re up to 1700°F when used properly.
Your safe must be closed and latched in order to properly protect the
contents from re.
L-10-XZ
L-10-XZ
1
4
7
2
5
8
0
3
6
9
#
Red Light
#*#
1TB HARD DRIVE
MODEL: HD12234451231
SERIAL: 123.444.345.677
CDs & DVDs USB Drives External
Hard Drives
USB 2.0
1
4
7
2
5
8
0
3
6
9
#
1
HOUR
Gripping Ridges
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert 2087DF-BD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert 2087DF-BD in the language / languages: English as an attachment in your email.

The manual is 4.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info