795180
13
Zoom out
Zoom in
Previous page
1/48
Next page
Setting Up Your Model 1501 System
Model 1501 User's Manual
9
INSTALLING AND CONNECTING THE CAMERAS
1 Select the position for the camera and install a mounting bracket (supplied).
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.
2 Screw the camera on the bracket. Tighten the lock nut to secure the camera on
the bracket.
3 Adjust camera to the proper view angle. Make sure the lens is upright relative to your
subject. Tighten the thumb bolts.
4 Connect the power and video connectors to the corresponding connectors on the BNC
cable (supplied).
The cables are not weather resistant and should be sheltered from moisture, rain, and
sunlight.
5 Connect the BNC and power cable connectors to the power and video connectors at the
monitor-DVR.
Note: When installing cameras on an external wall, pass the power cable through the
wall as close as possible to the cameras to reduce the chance of tampering with
the cables. After drilling any hole though an external wall for cable, make sure
the hole is sealed up around the cable using a sealant.
camera mounting
bracket
lock nut
thumb bolts
connectors
from camera
BNC cable to
monitor-DVR
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert 1501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert 1501 in the language / languages: English as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info