795166

First Alert 1039102 - Onelink Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Setup & Installation
~
DANGER: ELECTRICAL SHOCK HAZARD. Turn o power to the area where
you will install this unit at the circuit breaker or fuse box before beginning installation. Failure to
turn o the power before installation may result in serious electrical shock, injury or death.
!
WARNING: Make sure the alarm is not receiving excessively noisy power. Examples of noisy power
could be major appliances on the same circuit, power from a generator or solar power, light dimmer on the
same circuit or mounted near fluorescent lighting. Excessively noisy power may cause damage to your alarm.
!
WARNING: Installation of this unit must conform to the electrical codes in your area; Article
760 of NFPA 70 (NEC), NFPA 72, NFPA 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA); OTFDC
(CABO), and any other local or building codes that may apply. Wiring and installation must be
performed by a licensed electrician. Failure to follow these guidelines may result in injury or
property damage. This unit must be powered by a 24-hour, 120VAC pure sine wave 60Hz circuit.
Be sure the circuit cannot be turned o by a switch, dimmer, or ground fault circuit interrupter.
Failure to connect this unit to a 24-hour circuit may prevent it from providing constant protection.
Tools You Will Need:
• Needle-nose pliers or utility knife • Wire strippers
• Standard phillips screwdriver • Ladder
Before you begin, ensure the Android device is updated to 5 or later and iOS device is updated to iOS 10.0 or later, then
download the free Onelink Home App from the App Store or Google Play and follow the installation and setup instructions.
NOTE: You must enable iCloud Keychain to use Onelink Safe & Sound on an iOS device. On your iOS device, tap
Settings > [your name] > iCloud, tap Keychain and slide to turn on iCloud Keychain, follow onscreen instructions.
This smoke/CO alarm is designed to be mounted on any standard wiring junction box up to a 4-inch (10 cm)
size, on the ceiling. Read “Where to Install” and “Where Not to Install” before you begin installation.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert 1039102 - Onelink at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert 1039102 - Onelink in the language / languages: English as an attachment in your email.

The manual is 2.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info