549782
8
Zoom out
Zoom in
Previous page
1/104
Next page
8
!!!DANGER!!!
1. NEVER store an extra gas cylinder underneath or close to the barbecue
or in conned spaces.
2. NEVER ll the gas cylinder over 80%. Overlling a gas cylinder is
dangerous, because excess gas can leak out of the safety valve. Gas
can escape from the safety valve causing a re.
3. The connection openings of the gas cylinder must be provided with
protective covers.
4. In case you discover a gas leak in the extra gas cylinder, immediately
keep your distance and call the re department.
VERY IMPORTANT: DISCONNECT THE GAS CYLINDER WHEN
THE BARBECUE IS NOT IN USE.
DISCONNECTING THE GAS CYLINDER:
Turn o all knobs.
Completely close the gas tap of the gas cylinder (turn clockwise until
the knob stops).
Remove the pressure regulator from the gas tap by turning the quick-
connect nut counterclockwise.
Replace the protective cover on the gas tap of the gas cylinder.
LEAK TEST
GENERAL
All gas connections of the barbecue are tested for leaks in the factory prior
to shipment. Nevertheless, when mounting the device it must be checked
entirely for gas leaks, because of possible damages during transportation
or due to exposure to extreme pressure. Regularly check the device for
leakage, or check whether you can smell any gas.
BEFORE CHECKING:
Make sure to remove all packing materials from the barbecue, including
the straps keeping the burner in its place.
Do not smoke while checking for leakage.
Never check for leakage with open re.
Prepare a solution of water and soap of one part detergent and one
part water. Use a spray can, brush or cloth to apply the solution to the
connections. Make sure the gas cylinder is full before the rst leak test.
Checking for leaks must be performed outdoors on a well-ventilated
spot, away from ignition sources such as gas or electrical devices and
combustible materials.
Keep the barbecue away from open re and/or sparks during the test.
CHECKING:
Make sure all control knobs are set to position OFF”.
Make sure the pressure regulator is properly connected to the gas cylinder.
Completely open the gas tap of the gas cylinder by turning the knob
counter-clockwise. In case you hear a hissing sound, IMMEDIATELY turn
o the gas; this indicates a serious leak in the connection. Contact your
gas supplier or re department.
Check each connection of the gas cylinder all the way through to the
taps part (the hose leading to the burner) by spraying or brushing the
soap solution on the connections.
There is a leak when soap bubbles appear. IMMEDIATELY close the gas
tap of the gas cylinder and carefully check all connections. Open the gas
tap again and perform a new check.
Always close the gas tap of the gas cylinder after the leak test by turning
the knob clockwise.
Only use the parts recommended by the manufacturer for this
barbeque. The warranty will become void when using other parts. Do
not use the barbeque until all connections are inspected and you are
certain these show no signs of leakage.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Firefriend BQ-6395 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Firefriend BQ-6395 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info