737905
9
Zoom out
Zoom in
Previous page
1/26
Next page
3.2 Pas de zitpositie aan
Zithoogte (verticale aanpassing):
De belangrijkste positiemaat is de zithoogte. De hoogte van
de zitbuis is correct ingesteld als u:
- zet een pedaal in de laagste stand.
- Ga zitten en houd u vast aan het stuur
- De voet aan welke kant het pedaal het laagst is
Positie op het pedaal.
- Het been mag niet in het kniegewricht worden gestrekt!
Varieer de zithoogte zodat deze het meest comfortabel voor
u is, maar zorg ervoor dat het kniegewricht niet wordt uit-
gerekt!
De zadelpen mag maximaal worden gebruikt. mark
uitgetrokken worden!
Zadelinstelling (horizontaal): Na het instellen van de zithoogte
moet de zadeldrager worden aangepast. U kunt dit eenvou-
dig doen door de grijpschroef los te draaien en de
zadelschuif naar uw lengte te verplaatsen. Bij het instellen
kan ook rekening worden gehouden met de volgende vuist-
regel:
Met de pedaalcrank in een horizontale positie, moet de hoek
tussen de dij en het onderbeen 90 ° zijn.
Kantelverstelling van het zadel: open beide moeren op het
zadelframe totdat het zadel gemakkelijk kan worden
gedraaid. Pas de helling van het zadel aan door op de punt
van het zadel te drukken of eraan te trekken. Zodra u een
comfortabele helling hebt bereikt, gebruikt u het juiste
gereedschap om de eerder geopende moeren op het zadelf-
rame vast te draaien.
3.2 How to adjust the saddle postion
Height of the saddle: Most important is the correct height of
the saddle. To make sure it is correct please follow the below
instruction:
- one pedal should be in the lowest position
- sit on the item and put both hands on the handlebar
- put the foot on the pedal, which is in the lowest position
- your knee is not allowed to be straight. Adjust the height,
so that the position is as much as possible comfortable for
your, but make sure, that you won´t overstraighten your knee!
The saddle may only be pulled out to the max. position as
indicated
Horizontal saddle adjustment: Adjust the height of the
saddle first. Unfasten the stargrip and move the saddle slider
forward or backward.
Adjust it to a position, that when the pedals are
in the middle position, your knee should be at a 90 degree
angle°.
Saddle incline adjustment: Open the 2 pcs of nuts under the
saddle, till the saddle can be turned. Push or pull the saddle
till you seat comfortable. Tight both nuts.
08
3.3 Hoogteregeling
Vloerafstelling is mogelijk door de hoogte-afstelkappen op de
achterste standaard te draaien. Door tegen de klok in te
draaien, wordt de hoogte-instelling losgeschroefd. Zorg
ervoor dat er nog voldoende schroefdraden in de voetkap
zitten.
3.3 Height adjustment
Turning the height adjustment screws can solve the wobble
of the ergometer. Turn the screw anti-clockwise increases the
height. Please pay attention that there is enough thread left
in the foot cap.
Verzorging
Kortom, het apparaat heeft geen onderhoud nodig.
Controleer regelmatig alle onderdelen van het apparaat
en de dichtheid van alle schroeven en verbindingen.
Vervang defecte onderdelen onmiddellijk via onze klan-
tenservice. Het apparaat mag niet worden gebruikt totdat
het is gerepareerd.
Onderhoud
Gebruik voor het reinigen alleen een vochtige doek zon-
der scherpe reinigingsmiddelen. Zorg ervoor dat er geen
vloeistof in de computer komt.
Onderdelen (stuur, loopvlakplaten) die met zweet in aan-
raking komen, hoeven alleen met een vochtige doek te
worden schoongemaakt.
Maintenance
In principle, the equipment does not require
maintenance.
Regularly inspect all parts of the equipment and the
secure seating of all screws and connections.
Promptly replace any defective parts through our
customer service. Until it is repaired, the equipment
must not be used.
Care
When cleaning, use only a moist cloth and avoid harsh
cleaning agents. Ensure that no moisture penetrates
into the computer.
Components (handlebar, pedals) that come into contact
with perspiration, need cleaning only with a damp cloth.
4. Verzorging en onderhoud
4. Care and Maintenance
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finnlo 3571 Maximum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finnlo 3571 Maximum in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info