528544
12
Zoom out
Zoom in
Previous page
1/29
Next page
11
Quick Tasten: Durch Drücken der Quick-Tasten können direkt
bestimmte Geschwindigkeiten und Steigungen vorgegeben und
aktiviert werden.
Quick buttons: Pressing the Quick buttons will activate
prearranged values for speed and incline.
5.2 Computer Inbetriebnahme
5.2.1 Quick Start
a. Schalten Sie das Laufband ein.
b. Positionieren Sie den Not-Aus-Schlüssel auf der
gekennzeichneten Position. Ein Signalton ertönt, das
PULSE/CAL Fenster zeigt 0, das SPEED/DISTANCE
Fenster zeigt 0, und im großen Anzeigefenster leuchtet ein
Herzsymbol
c. Drücken Sie
um das Laufband zu starten. Das Laufband
startet mit einer Geschwindigkeit (SPEED) von 1.0 km/h,
und einer Steigung (INCLINE) von 0%.
d. Durch eine blinkende LED wird der Beginn einer 400m
Strecke angezeigt. Die LED´s beginnen von der oberen Mitte
gegen den Uhrzeigersinn zu leuchten. Eine Runde enspricht
400m.
e. Während des Trainings können Sie durch Drücken der
-Tasten die Geschwindigkeit oder durch Drücken
der
-Tasten die Steigung ändern. Dasselbe
funktioniert auch mit den Quick-Tasten.
f. Ein einmaliges Drücken der -Taste während des
Trainings aktiviert die Pausenfunktion für ca. 240 Sekunden.
Das Zeitfenster zeigt „STOP“ an. Alle Werte hören auf mit
zählen. Nach diesen 240 Sekunden springt der Computer
wieder in den START -Modus um.
g. Drücken Sie die
-Taste ein zweites Mal und halten diese
beim zweiten Mal für drei Sekunden gedrückt, dann werden
alle Daten gelöscht und Sie befinden sich wieder im Start-
Modus.
5.2 Computer operation
5.2.1 Quick Start
a. Turn on the treadmill.
b. Put the safety key in the recess of the console. The beeper
will sound and the PULSE/CAL window will display 0, the
SPEED/DISTANCE window will display 0 and in the big
windon heartsymbol is blinking.
c. Press
to start the treadmill and it will start at SPEED
= 1.0 km/h, INCLINE = 0%.
d. A blinking LED shows the start of a 400m lap. The LED´s
will blink, starting from the middle position counter
clockwise. One round stands for a 400m lap.
e. During work out, press
to increase or decrease
the speed, or press
to increase or decrease the
incline. You can also do it with the Quick-buttons.
f. During work out, press once, the treadmill will stop
running. Time window will display "STOP". At this time, all the
values on the computer will stop counting. The treadmill will
pause for 240 seconds and then come back to the Start/
Ready position.
g. If press press
again , but hold it at the second time
for 3 seconds, the treadmill will reset to the Start/Ready
position.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finnlo 3509 ENDURANCE III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finnlo 3509 ENDURANCE III in the language / languages: English, German as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info