Manual Finlux FL5526UHD (page 16 of 33) (English)

683750

Zoom out

Zoom in

1/33

English - 43 -

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded

to the connected USB disk.

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You cannot use the timeshift fast reverse feature before

advancing the playback with the fast forward option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can press

Record button on the remote control again to record

the next event after selecting the next programme

from within the EPG. Press Stop button to cancel

instant recording.

You can not switch broadcasts during the recording

mode. While recording a programme or during the

timeshifting, a warning message appears on the screen

if your USB device speed is not sufcient.

Watching Recorded Programmes

Select Recordings from the Media Browser menu.

Select a recorded item from the list (if previously

recorded). Press the OK button to view the Play

Options. Select an option then press OK button.

Note: Viewing main menu and menu items will not be

available during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be

available. You can use Rapid advance button to

slow forward. Pressing Rapid advance button

consecutively will change slow forwarding speed.

Recording Conguration

Select the Recording Settings item in the Media

Browser>Settings menu to congure the recording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

dened the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN

that you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

All les in the list will be

continuously played in original

order

Start playback with the OK

button and activate

The same le will be played

continuously (repeat)

Start playback with the Play

button and activate

All les in the list will be

played once in random order

Start playback with the Play

button and activate ,

All les in the list will be

continuously played in the

same random order.

FollowMe TV (if available)

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: This application may not be compatible with all mobile

devices. Both of the devices must be connected to the same

network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the System>Settings>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Finlux FL5526UHD in the language / languages: English as an attachment in your email.

The manual is 9,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Finlux FL5526UHD

Finlux FL5526UHD User Manual - German - 33 pages

Finlux FL5526UHD User Manual - Dutch - 35 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Finlux FL5526UHD Manual

Product: