Manual Finlux FL4330CBU (page 48 of 206) (English, German, Dutch, Danish, French, Spanish)

706717

Zoom out

Zoom in

1/206

English - 13 -

Watching Recorded Programmes

Select Recordings from the TV menu. Select a

recorded item from the list (if previously recorded).

Press the OK button to view the Options menu. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Fast Forward button to slow forward.

Pressing Fast Forward button consecutively will

change slow forwarding speed.

Recording Configuration

Select the Settings tab in the TV>Recordings menu

to configure the recording settings and press OK.

Format Disk: You can use the Format Disk option for

formatting the connected USB disk. Your PIN will be

required to use the Format Disk feature.

Note: Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the file of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video file or displaying a picture

file. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

FollowMe TV

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: Depending on model, your TV may not support this

function. The application may not be compatible with all

mobile devices. Both of the devices must be connected to

the same network.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>More menu

should be set as Enabled at first. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>More

menu accordingly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Finlux FL4330CBU in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 8,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Finlux FL4330CBU Manual

Product: