500532
10
Zoom out
Zoom in
Previous page
1/38
Next page
English - 9 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz.
Then the standby LED lights up. (The LED will blink
during the standby On/Off)
To switch on the TV from standby mode either:
Press the “
” button, P+ / P- or a numeric button on
the remote control.
Press the -P/CH or P/CH+ touch button on the TV. The
TV will then switch on.
When the mains power is rst connected to the device
the light on the front of the unit will start ashing for
a few seconds, when it stops ashing and remains
constant, the TV will be in standby mode.
Note: If you switch on your TV via PROGRAMME UP/
DOWN buttons on the remote control or on the TV
set, the programme that you were watching last will be
reselected.
By either method the TV will switch on.
Note: When the device is coming out of standby he light
on the front of the unit will ash until the picture appears.
If you activate the power operation again (before the light
has stopped ashing) the device will turn off into standby
mode again. This is normal operation and not a fault.
Note: The standby light will blink while the TV is
powering up from Standby mode.
To Switch the TV Off
Press the “ ” button on the remote control or press
the STANDBY touch button on the TV, so the TV will
switch to standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
When the TV is operated for the rst time, the
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
Use “ ” or “ ” buttons to select your language
and press OK button to set the selected language
and continue.
After selecting the language, the “ Welcome!
screen will be displayed, requiring you to set
Country,Teletext Language and Scan Encrypted
options.
By pressing the “ ” or “ ” button, select the country
you want to set and press the “ ” button to highlight
Teletext Language option. Use the “ ” or “ ” button
to select desired Teletext Language.
Press the “
” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
01_[GB]_[VESTEL_UK]_MB61_5110UK_PVR_IDTV_100Hz_55990LED_PLATINIUM4_10077371_50210679.indd 901_[GB]_[VESTEL_UK]_MB61_5110UK_PVR_IDTV_100Hz_55990LED_PLATINIUM4_10077371_50210679.indd 9 22.12.2011 10:31:2122.12.2011 10:31:21
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux 55S6040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux 55S6040 in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info