500519
12
Zoom out
Zoom in
Previous page
1/53
Next page
English - 11 -
Customer Helpline 0845 459 5282
Aerial Connection
Connect the aerial TV plug to the AERIAL INPUT
socket located at the rear of the TV.
1 3
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
Plug the power cable to the mains socket outlet.
Switching the TV On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50
Hz socket.
Press STANDBY touch button. Then the standby
LED lights up.
To switch on the TV from standby mode either:
Press the “ button, P+ / P- or a numeric button
on the remote control.
Press the -P/CH or P/CH+ touch button on the TV.
The TV will then switch on.
Note: If you switch on your TV via standby button on the
remote control, the programme/source that you were watching
last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
Press the button on the remote control or press
the STANDBY touch button on the TV, so the TV will
switch to standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active. The LED can also blink when you switch on
the TV from standby mode.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.
Do not insert a common interface module during the
search process.
When the TV is operated for the rst time, the
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
Use or buttons to select your language
and press OK button to set selected language and
continue.
After selecting your language, you will be required
to make the following settings: Country, Teletext
Language, Scan Encrypted and Active antenna
options.
Note:
Active antenna should normally be turned off for
most UK households.
By pressing “ or “ button, select the Country
you want to set and press button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux 40F8030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux 40F8030 in the language / languages: English as an attachment in your email.

The manual is 11,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info