584255
53
Zoom out
Zoom in
Previous page
1/79
Next page
English - 50 -
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “ ” button to decrease volume or “
button to increase volume, so a volume level scale (slider)
will be displayed on the screen.
Programme Selection
• Press “P/CH +” button to select the next programme or
P/CH -” button to select the previous programme.
Viewing Main Menu
• Press ” / “ buttons at the same time
to view main menu. In the main menu select sub-
menu using “P/CH -” or “P/CH +” buttons and enter
the sub-menu using “
” or “ ” buttons.
To learn the usage of the menus, refer to the menu
system sections.
AV Mode
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press button to increase the volume. Press
button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P/CH-” button to select the previous
programme.
• Press “P/CH +” button to select the next
programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 - 1000 (for IDTV) or 10-199 (for
analogue), press the numeric buttons consecutively.
Press directly the programme number to reselect
single digit programmes.
Initial Settings
When the TV is turned on for the rst time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “
” or “ ” buttons highlight the language
you want to set and press OK button.
You can get information about the menu usage by
pressing
button. Press button again to exit
the help menu.
After then, “First time installation” OSD will appear
on the screen. By pressing “
” or “ ” buttons, select
the country you want to set and press OK button.
Note: Country selection will not be available for UK.
Press OK to continue.
After then, the active antenna selection OSD appears
on the screen:
By pressing “
” or “ ” buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you can
select this option as On. Antenna power should be
“Off” when standard antenna is used instead of the
active antenna. See “Con guration Menu” in the
following sections for more information.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press OK button.
After then, the following OSD will be displayed on
the screen:
A02_[GB]_MB36_MASKE_1186UK_IDTV_TC_MPEG4_SILVER7_37845W_10067370_50163840.indd 50A02_[GB]_MB36_MASKE_1186UK_IDTV_TC_MPEG4_SILVER7_37845W_10067370_50163840.indd 50 22.02.2010 08:56:0322.02.2010 08:56:03
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux 37FLHD846 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux 37FLHD846 in the language / languages: English, German as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info