584240
24
Zoom out
Zoom in
Previous page
1/123
Next page
English - 23 -
Note: Country selection OSD will not be available
for UK.
After then, the active antenna selection OSD
appears on the screen:
By pressing “
” or “ ” buttons, set active
antenna mode as on or off.
If an active antenna is connected to your TV,
you can select this option as On. Antenna
power should be “Off” when standard antenna
is used instead of the active antenna. See
Con guration Menu in the following sections
for more information.
Press OK button on the remote control to
continue and the following message will be
displayed on the screen:
To start installation process, select “Yes”, to
cancel select “No”.
To select the “Yes” or “No” option, highlight the
item by using “
” or “ ” buttons and press the
OK button.
After then, the following OSD will be displayed
on the screen:
If you select CABLE option, the following screen
will be displayed:
You can select frequency ranges from this
screen. For highlighting lines you see, use “
” or “ ” button. You can enter the frequency
range manually by using the numeric buttons
on the remote control.
After this operation, you can set Search Step
as 8000 KHz or 1000 KHz. If you select 1000
KHz, the Tv will perform search process in
a detailed way. Searching duration will thus
increase accordingly. When nished, press
OK button to start automatic search. Automatic
searching screen will be displayed during the
process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
If you select AERIAL option from the Search
Type screen, the digital television will search
for digital terrestrial TV broadcasts:
The IDTV will automatically tune to the UHF or
VHF (**for continental Europe country options)
transmission channels, searching for digital
terrestrial TV broadcasts and displaying the
names of channels found. This process will
take about a few minutes. To cancel searching,
you can press the “MENU” button at any time
during the process.
Note: If the digital TV fails to store any channels, “No
channels available.” message will be displayed on
the screen.
Either you select AERIAL or CABLE option
from the search type menu, after the digital
automatic search is completed, the following
message asking for analogue channel search
appears on the screen:
To search for analogue channels, select “Yes”.
TV switches to the analogue TV mode. The
menu below is displayed to search for analogue
channels:
A01_[GB]_MB35_FINLUX (32FLHD845)_DVB_TC_ORTAK_1186UK_50144034.indd 23A01_[GB]_MB35_FINLUX (32FLHD845)_DVB_TC_ORTAK_1186UK_50144034.indd 23 06.03.2009 19:32:3806.03.2009 19:32:38
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux 32FLHD845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux 32FLHD845 in the language / languages: English, French as an attachment in your email.

The manual is 8,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Finlux 32FLHD845

Finlux 32FLHD845 User Manual - German, Italian - 127 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info