637822
26
Zoom out
Zoom in
Previous page
1/272
Next page
DAYTIME RUNNING
LIGHTS (DRL)
"Daytime Running Lights"
18) 19)
With the ignition device turned to MAR
and the light switch ring nut turned to
position Othe daytime running lights
are automatically activated (the other
lights and interior lighting remain off).
FOG LIGHTS
(where provided)
Press the button to turn on the fog
lights with side lights and dipped beam
headlights on.
When the fog lights are on, the side
lights and number plate lights are also
on, while the daytime running lights
are off.
Press the button again or turn the
switch ring nut to Oin order to switch it
off.
REAR FOG LIGHT
(where provided)
The button that controls switching on
and off of the rear fog light is integrated
into the light switch.
Press the button to turn on the rear
fog light with side lights and fog lights
on.
PARKING LIGHTS
These lights can be switched on with
ignition device at STOP or with key
removed, by moving the light switch
ring nut to position Oand then to
position , the switch will go back
to position O.
The warning light switches on in
the instrument panel.
HEADLIGHTS OFF TIMER
(Follow me home)
Activation
With headlights on, bring the ignition
device to STOP.
Within 2 minutes, rotate the light switch
nut to O: the timing set previously
through the Menu (0, 30, 60, up to 90
seconds) starts.
Deactivation
This function is deactivated by
switching on the headlights, the side
lights or bringing the ignition device to
MAR.
"Follow me home" function
interaction with system
Uconnect
TM
system
If on the menu Uconnectthe timer is
set to 0 seconds it is possible, using
the high beam lever, to turn on the
lights for a pre-set time of 30 seconds.
It is possible to activate the lights 7
times up to a maximum of 210
seconds.
If, however, a timing (of 30 or 60
seconds, for example) has been set
through the "Settings" menu of
Uconnect, each time the engine is
switched off, the "Follow me home"
function will be activated for the
duration of that timing (you will not be
able to change it using the light switch),
only if the ring nut A fig. 29 is rotated
to position O.
MAIN BEAM HEADLIGHTS
With the light switch ring nut turned to
position or AUTO push the left stalk
A fig. 30 forwards, towards the
dashboard.
With main beam headlights on, the
warning light on the instrument
panel will come on at the same time.
24
GETTING TO KNOW YOUR CAR
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fiat 500 X - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fiat 500 X - 2015 in the language / languages: English as an attachment in your email.

The manual is 11,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fiat 500 X - 2015

Fiat 500 X - 2015 User Manual - German - 248 pages

Fiat 500 X - 2015 User Manual - Dutch - 280 pages

Fiat 500 X - 2015 User Manual - French - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info