637848
135
Zoom out
Zoom in
Previous page
1/230
Next page
REFITTING THE STANDARD WHEEL
Following the procedure described previously, raise
the car and remove the space saver spare wheel.
Versions with steel rims
Proceed as follows:
make sure the contact surfaces between standard
wheel and hub are clean so that the fastening
bolts will not come loose;
fit the standard wheel inserting the 4 bolts into
the holes;
using the wrench provided, tighten the fastening
bolts;
press-fit the hub cap, aligning the special splining
(on the cap) with the inflation valve;
lower the car and remove the jack;
using the wrench provided, fully tighten the bolts
in the sequence shown previously.
Versions with alloy wheels
insert the wheel on the hub and using the wrench
provided tighten the bolts;
lower the car and remove the jack;
using the wrench provided, fully tighten the bolts
in the sequence shown in fig. 101;
reinstall the pressure-fitted hub cap, making sure
that the reference hole on the wheel is aligned
with the reference hole on the cap.
IMPORTANT If it is not fitted properly, the hub cap
may detach itself when the vehicle is running.
After tyre replacement
arrange the space-saver spare wheel D fig. 97 in
the specific compartment in the boot;
insert the partially open jack into the container C
and force it slightly into its housing so that it does
not vibrate when the car is moving;
put the tools back into their places in the
container;
stow the container complete with tools on the
spare wheel and secure everything with the
clamping device B;
correctly reposition the boot stiff cover.
IMPORTANT Do not use air chambers with Tubeless
tyres. Check the inflation pressure of the tyres and
the space-saver wheel regularly.
IMPORTANT You will need to change the set of
bolts if you want to change the type of wheels fitted
(alloy rims instead of steel rims, and vice versa).
The whole set of fastening bolts must be replaced by
another set of suitably sized bolts and use a special
space-saving wheel with different build
characteristics.
You should keep the bolts and space-saver wheel in
case you decide to use the original type of wheel
later on.
132
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fiat 500 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fiat 500 - 2012 in the language / languages: English as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fiat 500 - 2012

Fiat 500 - 2012 User Manual - German - 230 pages

Fiat 500 - 2012 User Manual - Dutch - 234 pages

Fiat 500 - 2012 User Manual - French - 230 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info