383463
14
Zoom out
Zoom in
Previous page
1/94
Next page
14
Technical data TS 75 EBQ/ TS 75 EQ
Power 1600 W
(110 V-Version 13 A)
Speed (idling) 1350 - 3550 rpm
Inclination 0° - 47°
Cutting depth at 0° 0 – 75 mm
Cutting depth at 45° 0 – 56 mm
Saw blade dimensions 210x2.4x30 mm
Weight 6.2 kg
Degree of protection
/II
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Warning of general danger
Manual, read the instructions.
Wear ear protection!
Wear protective goggles.
1 Use for intended purpose
These machines are intended to be used for
sawing wood, wood-like materials, plaster and
cement-bonded fibre materials, and plastics.
With the special saw blades for aluminium offered
by Festool, these machines can also be used for
sawing aluminium.
Only saw blades with the following specifi cations
must be used: saw blade diameter of 210 mm;
cutting width of 2.4 mm to 2.6 mm; toolholder
diameter of 30 mm; blade core thickness of max.
1.8 mm; suitable for speeds of up to 5000 rpm.
Do not use any abrasive wheel.
Festool electric power tools should only be in-
stalled in work benches specially designed by Fes-
tool. The electric power tool may become unsafe
and cause serious accident if installed in benches
from other manufacturers or self-manufactured
work benches.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General safety rules
WARNING! Read all safety warnings and
all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
1) Cutting procedures
a)
DANGER: Keep hands away from cutting
area and the blade. Keep your second hand
on auxiliary handle, or motor housing. If both
hands are holding the saw, they cannot be cut
by the blade.
b) Do not reach underneath the workpiece. The
guard cannot protect you from the blade below
the workpiece.
c) Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
d) Never hold piece being cut in your hands or
across your leg. Secure the workpiece to a
stable platform. It is important to support
the work properly to minimize body exposure,
blade binding, or loss of control.
e) Hold power tool by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a „live“ wire will
also make exposed metal parts of the power
tool „live“ and shock the operator.
f) When ripping always use a rip fence or straight
edge guide. This improves the accuracy of cut
and reduces the chance of blade binding.
g) Always use blades with correct size and shape
(diamond versus round) of arbour holes.
Blades that do not match the mounting hard-
ware of the saw will run eccentrically, causing
loss of control.
h) Never use damaged or incorrect blade wash-
ers or bolt. The blade washers and bolt where
specially designed for your saw, for optimum
performance and safety of operation.
i) Wear suitable protection such as
ear protection, safety goggles, a
dust mask for work which gener-
ates dust, and protective gloves
when working with raw materials
and when changing tools.
Circular saw TS 75 EBQ/ TS 75 EQ
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ts 75 ebq fs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ts 75 ebq fs in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info